Now for the assembly of the center body section. You see why it's called strip-and-panel construction. The panel parts that you saw in the first post, are joined by strips. The strips for the center section are two and a half inches wide.
Notice the half-inch wide strips along the edges of the undersides of the strip parts. This makes the edges double thick for easy gluing. I don't like to use flaps for gluing; it's cumbersome, and can be sloppy, so I glue edge-to-edge, strip edge to panel edge.
When joining two strip segments together, as with the bumper segment to the grille segment, they are connected, by both being glued to a piece of paper
|