Continuing the build!
Photo 5 Insert the simulated water internal former from the bottom and seat firmly up against the water level line strip.
Photo 6 I had originally intended to make a bottom plug with a sandwitch of internal former and base. Not a good idea, but with this picture, envision inserting a bottom internal former and gluing, then gluing the internal former and sidewall to the base.
Photo 7 Base attached as described above.
Photo 8 Remove the center from the top rings. Laminate and remove the outer card stock.
__________________
fishBait
http://modelsnmoore.com
Denken sie aus der Kiste!
Schauen mit den Augen nicht die Hände!
|