Thread: Moon Palace
View Single Post
 
Old 02-09-2017, 10:40 AM
jleslie48 jleslie48 is offline
Member
 
Join Date: Aug 2007
Location: Airmont, NY
Posts: 1,152
Total Downloaded: 528.19 MB
Quote:
Originally Posted by jleslie48 View Post
getting ready for my own build. I worked up the graphics a little bit more,
and after reading the warping issues I double laminated the moon using the
bonding trick from this thread:

Bonding (gluing) with cling film (food wrap). IT WORKS!

I first laminated two layers of 65lb paper, then I laminated that to a manila
envelope. That should be thick enough so when I glue that to corrugated
cardboard I won't get any warping from the white glue. I am expecting my
moon to be at least 6mm thick, and I have printed yellow paper to fill the 6
mil thickness to make the moon look like a solid piece. I have also done some
color work on one of paperpino's celestial globes, and plan to use that as an
"awning" over the courtyard with embedded LED lighting so the whole thing
acts like a night light. paperpino's globe will be printed put together as a half
dome, with print on both sides, actually I just printed the northern hemisphere
at 101% and fit the 100% sized southern hemisphere on the inside to make a
dome like at grand central station. this way I can run the wiring for the leds
between the two layers so no wires show.







Ok, so back from vacation and the build went exactly as planned. Still
working on the lighting kit, the led's are so powerful the entire canopy glows,
so I'll have to put a sheet of black paper in the middle of the top half and
bottom half to stop the light bleeding through and showing the internal
structure. When I hang it from the two wires, it is not straight up and down,
but I will add some pennies to the inside of the "B" structure to balance that
out. the moon itself is rock solid, no flex what-so-ever.










Reply With Quote