View Single Post
Old 08-12-2017, 12:38 PM
mbauer's Avatar
mbauer mbauer is offline
Join Date: Apr 2009
Location: Nikiski, Alaska -9UTC/-8UTC DSTime
Posts: 3,064
Total Downloaded: 21.07 MB
Originally Posted by John Bowden View Post
you can always add more formers to stiffen up the inside.

The 1/72 A32X series I've done is pretty fickin strong. All I did was double the formers......basically one in front and one behind every joint..........

Now you may have to come up with something for the wings..........
If you're wanting to actually triple the formers/spars, the quickest way is to do a rough cut of the part, then glue the extra layers to the backside, allowing you to cut the part using the printed graphics on the top piece. Only need to cut one part this way. You will need to verify the knife is 90 deg for straight edges, unless you want the edge tapered.

I might have read your post wrong, thinking you are cutting three pieces out and then gluing them together.

Constructive criticism of my builds & comments are welcome!
Cardstock Property Tables and Terms
Flying Cardstock Models
Reply With Quote