thanks revell fan and john its hard to put her down.
forgot to mension that I added some lead to her boots and then stuffed her with tolet paper used a thired of a roll so far.
side of her boot with some leg
the other boot showing the inside part of the boot top. the front point of the inside pices I fond to be to wide at the point so cut wedge out narrowing the top by about 4mil the join was ok at the bottom.
fixed the lower leg to the inside of the boot ith the top edge fixed in place the only drawback to not scawing the parts is when it comes to fixing the edge pices is that the side are flat and the side thay fit are curded .
upper leg part redey to glue in place after glueing on the tabs I roled the part and dry held them to gether with a clip thill I came to glue them in place
left leg glued up
both leg done
[IMG]https://farm8.staticflickr.com/7822/46426892202_0aec9f2cfc_z_d.jpg
[/IMG
added her shorts gluded up well at the front but joining them at the back was not so strait forwared .
