View Single Post
 
Old 11-02-2019, 07:00 AM
Isaac's Avatar
Isaac Isaac is offline
Member
 
Join Date: Oct 2010
Location: Florida
Posts: 8,810
Total Downloaded: 679.43 MB
Exclamation Inlets contnued

Now that the inner air inlets are in place, its time to do the external fairing with the wings/fuselage.

Add the rib
Hawker Hunter F.5 WAK 1/33-img_0608.jpgHawker Hunter F.5 WAK 1/33-img_0609.jpg


also, since the rear stub spar is kind of thin at the rib, I added a piece of paper clip and then cut it to size. Glued using Cyno Acrylate ( CA glue ).
Hawker Hunter F.5 WAK 1/33-img_0610.jpg


add small strips to the side of the fuselage to attach the side cheeks.
Hawker Hunter F.5 WAK 1/33-img_0611.jpgHawker Hunter F.5 WAK 1/33-img_0612.jpg

Here is the external surface of the side fairing/cheek
Hawker Hunter F.5 WAK 1/33-img_0613.jpgHawker Hunter F.5 WAK 1/33-img_0614.jpg


The main landing gear bay is assembled, dry fit, but is not glued.
Hawker Hunter F.5 WAK 1/33-img_0615.jpg


Now glue in place at the fuselage first. Nice fit.
Hawker Hunter F.5 WAK 1/33-img_0617.jpgHawker Hunter F.5 WAK 1/33-img_0618.jpg


next, glue to the rib
Hawker Hunter F.5 WAK 1/33-img_0620.jpgHawker Hunter F.5 WAK 1/33-img_0621.jpgHawker Hunter F.5 WAK 1/33-img_0622.jpg


and both cheeks are glued in place
Hawker Hunter F.5 WAK 1/33-img_0623.jpgHawker Hunter F.5 WAK 1/33-img_0624.jpgHawker Hunter F.5 WAK 1/33-img_0625.jpg



Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500]
Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint
Reply With Quote