These are the last parts, before putting all together:
- the completed mag with its floor plate
- barrel and top box already joined
- ambidextrous safety, glued with the axle to just one end to allow the following building
- hammer with its axle
- the two cartridges
- breech face
I made a mistake building the cartridges: I mounted the cylindrical body upside down, the thin black striped had to be on the bottom side. (I redo them, but I haven't taken a picture yet
).
I made a cut in the bottom of the breech to later insert a rubber band, as suggested by the designer in his time-lapse video instructions, as slide spring.