|
and now get it all!
color of the hull.
soft color?
after trying for a long time, brown / wood was dropped,
too dark for such a big ship.
wanted a king of france to build a ship,
so bright blue sure, but ... what else.
light yellow.
Try it out. or light brown?
don't forget that I hardly have any colors at home, so I tested a mix
Another problem for everyone who paints cardboard:
always with the same color - use the same cardboard.
-----------------------------------------------------------------
for the central upper wall I have to use different cardboard than
the rear and front wall strips to save material.
you look carefully, in the middle (B) one shade of blue,
on the sides (A - C) another shade.
even if the colors weren't so accurate in 1760,
the model should have it so far.
so stick the same cardboard in the middle and brush again.
old box below and new above. the blue is the same,
but the color ... not.
-----------------------------------------------------------------
up to this point i have learned about various mistakes.
1- always use the same box. and if possible, not printed or with dark color.
2- if it is to be painted with paint, never cardboard under 240 g.
3- Always before, check with a cardboard strip that the frames fit
together exactly. -
Unfortunately, even a billing of the frames is not a guarantee,
and none is a trip to ...... ergen wo!
4- Whom one should glue parts, especially when large parts,
always from top to bottom, not from side to side.
5- go on ............
|