Fallout 3 Rob Co terminal/ MTK/ 1:2

[toudi sk]

Alpha Fission battery version ready.





Now I have to redesigned it to version beta, because I figured out how to ensure easy replacement of AAA batteries.
Below it will be a removable metal plate with a screw.

[toudi sk]

I dismantled the old relay to parts, but the first attempt did not work, the thread on the nut was bad.

I used a thread from another part of the relay. Here, a coarser material was used.

I have prepared new parts, modified almost all parts.
Now I have to cut them with a water jet. Try find the differences. :D

[toudi sk]

Contacts made of brass, metal plate made of stainless steel.

[toudi sk]

Springy contact.

Fission battery finally works.

[toudi sk]

Coated with super glue and sodium bicarbonate, then with putty and then colorized.
The inscription is created using the PROPISOT font set.





Fission battery finished.

[toudi sk]

The first attempt to illuminate the vacuum tubes from behind, it's not bad, but it's not exactly this, what I expected.





I continue with CRT, where I want to make a deflection coils.

[toudi sk]

A look at things I've already done and everything stacked inside the terminal.





Some progress on deflection coils.





Now I have to find a way to illuminate the vacuum tube on the screen, because iluminating from the side will not be good.

[toudi sk]

I made the illuminating vacuum tube on CRT in the socket and it looks good, I also change the location of the LEDs for the rest of the tubes.








I did a serious research (trial- and- error method) to get a picture on the screen. At first I made a light source in a shielded tube.





But I found that I had to make a hole in the shape of the future image in the cover.





Of course, finally, there will be the Brotherhood of Steel logo.

[toudi sk]

Sketchup, Pepakura and cutting with water jet from 1mm plastic plate.
Logo height is 25mm.





Nothing big, but it looks relatively good.

[toudi sk]

I slowly approach the finish line. All is illuminated, I just have to close it.