Jupiter 2 building - Page 15

**blake7** · #**141** 01-27-2020, 11:12 AM

Maybe your computer hiccup when you zipped it or when it uploaded. As I said I never had a problem with your zips before. Again fantastic work so far. Can't wait to see the finished model. Good luck.

**surfduke** · #**142** 01-27-2020, 11:13 AM

See attached

**surfduke** · #**143** 01-27-2020, 11:14 AM

See attached

**surfduke** · #**144** 01-27-2020, 11:17 AM

That should help those without zip or with zip problems.

I'm off to beta build, label parts, and label key diagrams. I'll be posting pictures as I go also to help instruct. I'll also reconnect with Mike V. for instruction development with pictures and Key diagrams.

Enjoy!

**surfduke** · #**145** 01-27-2020, 11:39 AM

All the parts should be there now. Some aren't labeled and the key diagrams need to be labeled.

Let me know if you guys see anything I have missed. I also have a idea to bump down the scale of the lower deck interior so it will fit. But i'll get into that after this upper deck and the rest of the model build out.

Thanks for watching me stumble thru this warts and all. I have no problem being public with a musing build lol. Feel free to shoot the arrows now my dear fellows!

Bye! Bye!

**rickstef** · #**146** 01-27-2020, 02:04 PM

Quote:

Originally Posted by surfduke

BTW

PLEASE NOTE THAT THE BETA MASTER IS PUBLISHED IN A4 PAPER SIZE.

Following the request of the above post from overseas follower.

Thanks!

a consideration on printable surface might be a wise move
a parts area that is around 7.5x10 inches, this way it will print "squarely" on both sheet sizes.

**surfduke** · #**147** 01-27-2020, 02:18 PM

Sounds like a better idea. I'll keep that in mind when I do a final publish soon. Should be easy to make some minor layout changes to accommodate that max area. I'll make a template that size and use it as working area on each sheet from here forward.

Thanks Rick!

**rickstef** · #**148** 01-27-2020, 02:33 PM

the dimensions i gave might be a bit small, so maybe increasing it to 7.75 and 10.5, this way you have less waste space, and still print squarely

**surfduke** · #**149** 01-28-2020, 03:53 AM

Thanks I'll be adding part numbers to key diagrams as I build today so I'll make the adjustments while I have the files open. I'll also make a master template for future projects.

I hope I'm never to old to take advise and learn a new trick. And in the end it's about making the end product as universally accessable/useable as possible.

Keep watching this space for updates. I may be a day or so on build pictures.

Be safe out there today!

**surfduke** · #**150** 01-28-2020, 03:56 AM

Sorry for the misspelling and bad grammar. After all it is Duke speak LoL ��