|
|
|
#1
06-15-2018, 11:31 PM
|
||||
|
||||
|
Castle BÄRENFELS - 1:200 - Schreiber
Hello
My next project is the castle Bärenfels of Schreiber. It is a hand drawn bow with a lot of charm. Divided into three arches, you will find 45 parts. Except reinforcements I will make this time no supernatures, just build from the bow. The base plate, I first glued on 3mm chipboard. Best regards Kurt 
|
| Google Adsense |
|
#2
06-16-2018, 05:42 AM
|
||||
|
||||
|
Very good choice. I built that a few years ago.
All of the wall angles on part 7 are not 90°. I tried to make them all 90° before I realized that. You need to remember to put the courtyard insert part 24 in before closing up the bottom. Have fun in building it. The end result looks real good. 
__________________
~Doug~ AC010505 EAMUS CATULI! Audere est Facere THFC 19**-20** R.I.P. it up, Tear it up, Have a Ball
|
|
#3
06-16-2018, 11:14 PM
|
||||
|
||||
|
Hello SCEtoAUX ,
thank for the tip ! Welcome noble builders Now let's go to action ... The parts of the castle are reinforced with 0.9 mm Finn cardboard. The larger roof reinforcements are glued in after assembly. Assemble parts 1 + 1a ... and attach bay 2. The first part of the building is finished with the side bay window and the two chimneys. Best regards Kurt
|
|
#4
06-20-2018, 11:57 AM
|
||||
|
||||
|
Hello
but now here ... Part 6 grown ... then part 7 ... ... with bay window and chimney. Part 11 and the reinforced courtyard floor installed. Best regards Kurt
|
|
#6
06-26-2018, 08:13 AM
|
||||
|
||||
|
Hi Kevin ,
welcome again Hello ... Tower 12 built together. Roof prepared ... and flue and bay windows installed. Part 17 ... attached to tower 12 and provided with details. Best regards Kurt
|
|
#8
06-30-2018, 05:47 AM
|
||||
|
||||
|
Hi Kevin ,
yes the artwork is really wonderfull Hello everybody Tower 20 with roof ... connected to the main house. Now close the gap. I reinforce the access ramp with 0.8 mm cardboard and glue it to the castle. Best regards Kurt
|
|
#9
06-30-2018, 05:55 AM
|
||||
|
||||
|
Something I did to that ramp is to try and camouflage the dashed line.
Ramp with dashed line:  I used some pastel chalk to hide the dashed line: 
__________________
~Doug~ AC010505 EAMUS CATULI! Audere est Facere THFC 19**-20** R.I.P. it up, Tear it up, Have a Ball
|
|
#10
07-03-2018, 11:04 AM
|
||||
|
||||
|
Hi SCEtoAUX ,
I also make These final Hello friends of the castles now it goes to the finish straight .................. .. Now stick the whole castle on the reinforced base plate, it lacks the last four parts to complete. The fit of this model is just great, it's really fun to build the castle. I can only recommend this craft sheet !! Thanks for the attention and kind regards Kurt
|
| Google Adsense |
 |
|
|
Linear Mode
