#1
|
||||
|
||||
Tomb of Dante Alighieriho, Ravenna - 1: 150 - Ondrej Hejl
Greetings to your poets
With my next interim model, we want to honor the Italian poet Dante. On one sheet there are 56 neatly printed parts waiting for me ... in order not to cut the title page, I copied this and the base plate reinforced with 1.5 mm Finn cardboard Wall part 2 with 1mm cardboard reinforcements ... Part 6, the entrance door ... ... glue it on the back Sincerely Kurt |
Google Adsense |
#2
|
||||
|
||||
Looks good. Are there 9 circles shown anywhere?
__________________
~Doug~ AC010505 EAMUS CATULI! Audere est Facere THFC 19**-20** R.I.P. it up, Tear it up, Have a Ball |
#3
|
||||
|
||||
Great model that honors a great person.
Don |
#4
|
||||
|
||||
An interesting project.
__________________
Give me a pigfoot and a bottle of beer. On Flickr: https://www.flickr.com/photos/153077...57692694097642 |
#5
|
||||
|
||||
Hi Friends of Dante
Glue the left reinforcement only after gluing, so that the flap is also covered ... the closed wall ring ... ... glue it to the base plate ... gluing on top part 3 and bottom part 4 all around Sincerely Kurt |
Google Adsense |
#6
|
||||
|
||||
I reinforce false ceiling 7 on both sides with 1 mm cardboard each, and fix it on the wall Yours sincerely Kurt |
#7
|
||||
|
||||
The upper gallery with reinforcement cardboard ... three times part 11 ... ... glue into the sheets ... then glue on part 10 Sincerely Kurt |
#8
|
||||
|
||||
Glue the strip 9 at the top ... glue the intermediate floor 12 together ...
Glue 0.9 mm Finn cardboard on the top and bottom ... note the tiny details ... ... under the mezzanine Yours sincerely Kurt |
#9
|
||||
|
||||
Hi
Just a little bit of progress today Reinforce part 13 ... and glue on Yours sincerely Kurt |
#10
|
||||
|
||||
Now a little cutting exercise on the dome ... I'll replace the original tabs with blue ones Good preliminary rounds ... and glue step by step ... Until the dome is up Yours sincerely Kurt |
Google Adsense |
|
|