#1
|
||||
|
||||
Sea lighthouse in Kolberg Poland - GPM - 1:150
Hello friends of maritime architecture
In between I will build a model again that will be finished soon. I chose the Baltic Sea lighthouse in Kolberg, Poland. With 31 parts, the construction is quite clear. Except for the reinforcements, I will build the lighthouse as it is intended in the arch construction. Sincerely yours Kurt |
Google Adsense |
#2
|
||||
|
||||
Look forward to seeing it.
__________________
The SD40 is 55 now! |
#3
|
||||
|
||||
Hi Kevin ,
welcome on board Reinforce the base plate with 1.5 mm Finn cardboard ... I cut the original tab and replace it with one behind the glued tab, reinforcement prepared ... ... join together after coloring the edges ... but do not stick to the base plate yet Sincerely yours Kurt |
#4
|
||||
|
||||
In part 3 the serrated flaps are not used, instead 1.5 mm Finn cardboard is used for reinforcement ... now cut off the ring ... ... insert from below ... fits perfectly, even without glue Now divide the reinforcement into individual strips and glue in ... glue with the base plate Sincerely Kurt |
#5
|
||||
|
||||
now the pictures |
Google Adsense |
#6
|
||||
|
||||
Excellent photos showing the process!
|
#7
|
||||
|
||||
I like the model graphics very much.
It is going to look really good SS!
__________________
The SD40 is 55 now! |
#8
|
||||
|
||||
Thanks to eatcrow2 and Kevin
Also cut off the flaps on part 8 and glue the frames ... then close with part 11 at the top Cover the railing inside with gray cardboard ... and stick it on Best regards Kurt |
#9
|
||||
|
||||
Part 12 is doubled and cut up with gray construction paper ... stick the whole thing on top
Part 10 a ... glue all around Sincerely Kurt |
#10
|
||||
|
||||
Looking good Kurt!
__________________
The SD40 is 55 now! |
Google Adsense |
|
|