|
|
|
#11
11-11-2020, 11:53 AM
|
||||
|
||||
|
Beautiful work. The recessed niches add so much. Coloring/texturing looks like it was done with colored pencil rather than a computer program. Very effective.
__________________
Regards, Don I don't always build models, but when I do... I prefer paper. Keep your scissors sharp, my friends. 
|
|
#13
11-12-2020, 11:01 AM
|
||||
|
||||
|
thanks to Don and brianne
 Parts 6/7, the bell tower ... has been given a nice depth by repositioning the walls I cut off the outer flaps of the roof, for this I glue two flaps on the gable of the bell tower ... now the tower is being added ... ... and now I just need to put the roof on, which is very easy thanks to the gable tabs Sincerely Kurt
|
|
#14
11-14-2020, 12:35 AM
|
||||
|
||||
|
For the next part of the wall, I attached the brackets for the adjacent roofs in advance ... with the roof I'm still waiting ... ... the first part 8/9 comes next, there is a barred window ... which I cut out ... ... there is another 5 mm difference on the roof slope Sincerely Kurt
|
|
#15
11-14-2020, 11:53 PM
|
||||
|
||||
 I put a three millimeter thick spacer between the gable and the tower ... so the roof fits on it reasonably well The next roof fits very well again ... the gaps in the corner cladding are again "welded" with thick glue Sincerely Kurt
|
| Google Adsense |
|
#17
11-15-2020, 10:18 PM
|
||||
|
||||
|
Hi don , thanks to you
Part 14, the round side chapel, due to the rounding I now only use 0.9 mm Finn cardboard and 0.6 mm cardboard ... ... all good before rounds ... After gluing the lower frame, which gives the shape, I can build in the wall pieces ... ... so the whole thing is quite stable, let it dry well Sincerely yours Kurt
|
|
#18
11-16-2020, 10:29 AM
|
||||
|
||||
|
Now it is very easy to add the small side chapel ... Double roof F ... ... and put on Sincerely Kurt
|
|
#19
11-17-2020, 10:32 AM
|
||||
|
||||
|
The round choir is also prepared in the same way ... and attached ... ... on the roof Sincerely Kurt
|
|
#20
11-18-2020, 12:36 PM
|
||||
|
||||
|
The tower roof is doubled, as everything should at least be doubled, because the model cardboard is a bit thin ... ... the original tab is cut off and replaced with my own ... ... so there is no edge on the roof ... and the angled roof landscape is ready Sincerely Kurt
|
| Google Adsense |
 |
|
|
Linear Mode
