Prudenzio Contest - Nieuport Triple Play 1-100 scale

[gomidefilho]

Hello my friends!

My first participation in this contest is a triple play of Nieuport Fighters from Prudenziatti, I choose for this build a Nieuport 24 from Corpo Aeronauttico (Italian Air Force in WWI), a Nieuport 17 (DUKWS Build) from Russian Air Service and a esoteric Korosawa Ko-3 (Nieuport 24 build under license in Japan) used by Imperial Army Air Force in early 20's...

A First look about the kits, is a very simple build with beautiful textures, "shaped" engine and a spartan cockpit. Only issue is a tail in Nie 24 versions Zio use the same to all versions, for build a correct Nie 24 nedeed a small modification. Today I cut the pieces, first pics in the weekend...

[gomidefilho]

Well glentemans

I started cutting all the components of the three models, there is no simple task since many parts of these kits Prudenziatti.

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010035.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010036.jpg

Making a quick review of the models and observing the instruction manual that accompanies each file, to make the Nieuport 24 and Korozawa Ko 3, I'll spend a little more work because the author used the Nie 17 kit as the basis for all, changing only the rudder, but there is a need for these two to create the fuselage with circular section, a task that will not be difficult because of the nature of the type of construction without former. Wings are also a challenge in the three models, to leave with a reasonable looking, will have to undergo some modifications to address the assembly. Another modification is laminar, with a hard cardboard face of the engine, to generate a former to adjust and regulate the entire assembly of the fuselage. The tires will also be rolled, and do not intend to use the dual tabs, I still prefer the traditional method. Said these initial statement by hand to work ...

Continue soon...

[Don Boose]

Beautiful work, as always, Péricles.

Don

[gomidefilho]

Thank's Don, today or later tomorrow I sending the first pics of triple build...

[cjwalas]

I admire your organizational skills! I'll be very interested to see what modifications you do on the assembly. Zio's planes do seem to benefit from additional embellishments and I'm curious to find out how well the biplanes go together.
Chris

[Don Boose]

I didn't realize that one of the Nieuports was the Japanese license-built version. I have downloaded one of these and look forward to your information on modifications.

Don

[gomidefilho]

Thank's my friends" Yesterday I building cowlings and start fuselages, pics today or tomorrow with building notes...

[gomidefilho]

My friends I show the progress in Nieuports build. The first step is make a cownlings. I print my models in 120gs paper, this thickness is too weak, so I reinforce the engine face with 2 mm cardboard...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010021.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010025.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010026.jpg

I glue the main ring of cowling in face engine, and wait dry, after I cut the secundary ring...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010027.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010028.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010029.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010030.jpg

For make a perfect curve, a usefull tip is use a rubber, and press and slide piece with espherical former, for smal pieces is great...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010032.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010033.jpg

I make the gear box of engine, the method for former the piece is same, I pressing the piece with former and glue...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010034.jpg

And this step is finished. After I build the last ring of cownling, the method is same described above...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010035-1.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010036-1.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010037.jpg

The cownlings is finished...

Nexts steps: fuselage...

[gomidefilho]

The fuselage to reproduce NiE 17 or 24 still a problem, the model is projected for a round shape cross section, but in this case for Nie 17 the fuselage is a box cross in mid section, so a I build using two abordages:

Option 1 building a NiE-17 fuselage:

Rounded only nose and dorsal superior fuselage, gluing cowling after.

Option 2 building a NiE-24 fuselage:

Rounded all fuselage exception a bottom fuselage, gluing cownling whitout close all fuselage tabs...

Preparation:

The cockpits of Prudenziatti are very spartan, and the seats no represent a real simulation of real aircraft, so I painted the interior with back pen, and decided gluing only instrument board...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010022.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010023.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010038.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010024.jpg

I gluing the instrument board in cardboard for easier fix...

I Start the NiE-17 fuselage...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010039.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010040.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010041.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010044.jpg

I scored the sides and rounded only the dorsal part and engine area...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010047.jpg

In this case of Nie 24 I rounded all fuselage and gluing the cowling before close all fuselage

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010048.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010050.jpg

The idiot here do not remenber for make pics for building process in Nie 24 fuselage. I not build the fuselage of Korozawa. In the next atualization I show here and write about this vantages to glue cownling before the close fuselages...

Regards my friends...

[Don Boose]

I very much appreciate the photos and explanation, Péricles.

I am saving all this to guide my own (larger, of course) builds of some of these aircraft.

Many thanks for sharing the results of your experience.

Don

[cjwalas]

These look wonderful and your side by side build is fun to watch. Your build notes are invaluable. I'm not into WWI planes especially, but seeing your build is tempting me.
Chris

[gomidefilho]

Thank's my friends! In the weekend more to coming...

[gomidefilho]

Resuming the work, in the last week a my work in this model is very few... But showing the last progress in this planes...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010052.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010051.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010053.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010054.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010055.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010057.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010058.jpg

I promissed show the work to made a fuse of Nie 24, is a sequence of building, I glue first the gun area, rounder the fuse and glue the front, set the cownling and after gluing the rest...

Continue...

[gomidefilho]

After I made the underwings, the model have a problem is a simulate correct the atack border of wing, for this i made tabs with 90 gsm paper to glue in front area, and duplex cardboard for internal reinforcement.

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010077.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010078.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010079.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010080.jpg

After a long dry I rounded and form the wings...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010059.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010060.jpg

Before the gluing wings I gluing the instrumet board in this place in each plane...

So I glued the wings...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010081.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010082.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010083.jpg

Next steps, tail, and undercarriage...

[gomidefilho]

Another step done, at this time I build the tail of Nie 17/24, acording my first analisys in first post the major problem is a tail of Nie 24, need a small modification.

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/cauda.jpg

I cut made a form in superior face, gluing and cut before...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/cauda4.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/cauda3.jpg

The same modification is made for Italian Nie 24...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/cauda2.jpg

For Russian Nie 17 I use the original layout tail...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/cauda5.jpg

I cut and made each rudder...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/cauda7.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/cauda8.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/cauda9.jpg

The form of aircraft is show....

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/cauda6.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/cauda10.jpg

Next steps undercarriage and fuse details...

[Don Boose]

A nice little flight of Nieuports!

[gomidefilho]

Thank's Don... In the weekend more to coming... Zio models is very funny to build, and I love the textures...

[gomidefilho]

More to coming, today I made the tail atuactors, and undercarriage... Pics later...

[rockpaperscissor]

All are lookking very good. Nice rounding on the cowls.

[gomidefilho]

Thank's!!! :)

After a long hiatus, I resume the tiple build. At this time I make a small detail in Nieuports...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes1.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes2.jpg

With scraps of colored papaer, I made the atuactors of elevons and rudder...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes3.jpg

I cut, fold and glue the tail ski... Is a simple piece, is better if laminated, but I preserve in this case the original concept of build...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes4.jpg

The machine guns is a complicated piece to build, and the Prudenzio use a unusual soluction the ejector of cartridges is glue in hole in each side, with careful is posible glue with saisfatory results...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes5.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes6.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes7.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes8.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes9.jpg

After I used 120g colored paper to make windshield (lack in this kits), and front plate of machine guns...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes10.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes11.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes12.jpg

I paint the armation on windshield with acrilic paint, is a tiny and delicated work made with a brush 00...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes13.jpg

I use a part of seat (irreal to comparation a real aircraft) to make a former and part of the protection head, I use the top for this and laminated in duplex paper...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes14.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes15.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes16.jpg

This results:

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes17.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes18.jpg

Continue...

[gomidefilho]

After I make the undercarriage...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes21.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes22.jpg

In the axis i use rigid 0,45" orthodontical rigid wire to mak a strenght piece... All pieces is painted if this case and doped with CA glue to make strenght...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes23.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes25.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes26.jpg

I glue the legs with CA, adn glue the pieces for the front of machine guns...

I forgot to make pic for all process but...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes20.jpg

I use a punch hole to make this pieces, in black colored paper...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes28.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes29.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/Nieuportdetalhes30.jpg

I glue the axis in each aircraft. All ready to receive the control cables in tail...

See you soon... :)

[Don Boose]

Beautiful work on the undercarriages and guns! I am certainly learning a lot from your techniques, all applicable to 1/72 and 1/48.

Don

[gomidefilho]

Thank's Don, I upload new prrogress in the models tomorrow...

[Pat_craft]

Very interresting build ! Thank you for this step by step !

[gomidefilho]

Thank's my friends! Today I make a rigging for control wires in the tail, I show pics later...

Regards...

[Wyvern]

Dang, Pericles, my fingers are cramping just looking at your in-progress photos....

I'm seriously impressed!

Wyvern

[Paperwarrior]

I just found this thread. This is an amazing build and quite interesting. I didn't realize Japan had Nieuports. I too will be saving this thread as a tutorial.

Jeff

[gomidefilho]

Thank's my friends! Today I finish the first step of the rigging in three planes, pics later...

[gomidefilho]

In the next two weeks I busy in my work, but I return with the resume of building in Nieuports...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/nienovissimas1.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/rigginnie11.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/rigginnie.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/rigginnie1.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/rigginnie2.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/rigginnie3.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/rigginnie5.jpg

In the pics my assembly process, for cables I use fine wire used in tendon reconstruction, the Cup is Hot Chocolate, necessary in humidity winter in south of Brazil ;)

I use CA glue in gel to fix wire in paper...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/nienovissimas.jpg

The building line, note the strange in pipeline ;)...

Continue ---->

[gomidefilho]

After the tail rigging is complete I made the superior wings.

The method is same to previous build in inferior wings, I use a strip of heavy cardboard, and glue but strap to join the edge of wing I waiting many days to cure the glue in this case...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/nienovissimas2.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/nienovissimas3.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/nienovissimas4.jpg

For assegure a good union I use a metal spatula to obtain pression in glue area...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/nienovissimas5.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/nienovissimas6.jpg

And this final result, so patience to wait complet dry...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/nienovissimas7.jpg

Continue later (I hope...)

[doctormax]

nice workmanship.

[cjwalas]

Really looking wonderful! Your cable work is very impressive. This will be quite a line up when you're done!
Chris

[rockpaperscissor]

Interesting way to join the wing leading edges. I always learn new techniques from your threads.

[gomidefilho]

Thank's my friends!

I very happy with you kind words and comments. I believe in some days is more updates and conclusion of triple build...

Cheers

[gomidefilho]

My top priority at the moment is finish the Caproni Ca 3, I believe in one or two wek I retake the project... ;)

[gomidefilho]

Hello my friends! After the end of Caproni Ca 3 build, I resume the Nieuport triple build...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie3.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie2.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie1.jpg

I glue the wheels, is laminated with heavy carboard, and paint with black acrilyc...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie4.jpg

After I made the covers of wheels, for obtain the format I press the piece in rudder with former...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie5.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie6.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie7.jpg

After I glue the canvas with wheels...

After this process, the build is individual, my first finish, is Nie-17...

Continue in the next topic...

[gomidefilho]

I start build the mounts in central cabane...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie8.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie9.jpg

After I add the rigging in central cabane, note I positioned the rear struts in correct position...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie11.jpg

I add the atuactors with orthodontical wire...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie10.jpg

I glue without jig the superior wing in central cabane, the fit is very good...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie16.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie17.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie18.jpg

After dry I build main struts, and fix in the wing, no problems in this step...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie20.jpg

Continue...

[gomidefilho]

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie19.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie22.jpg

After I made the lewis gun mount in the top of superior wing, but I Confess not like this piece, is bigger and out of scale, but I build.

I started the rigging with wire, the same material used in control cables.

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie23.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie24.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie25.jpg

The rigging is very simple, for build I use Ca Glue and transfer compass to make all segments...

The last step is propeller, is a simple piece, the only tip is a curve the blades for obtain volume.

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie26.jpg


I glue the propeller in right place...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie37.jpg

I make and glue bracing montants in tail, is a lack in the kit and very common feature in real Nieuport 17, I made with color cardboard...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie27.jpg

Finish...

[gomidefilho]

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie36.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie35.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie34.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie33.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie32.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie31.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie30.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie29.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/NovasNie28.jpg

The next is Korozawa Ko 3, regards my friends, the process is same... ;)

[gomidefilho]

Hello my friends!!!

Another Prudenzio Nieuport finished. At this time I show my Korozawa Ko 3, copy of Nieuport 24 build in Japan for Imperial Japan Army Air Force in 20's...

The finished process is same of Nie 17...

Pics...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010152.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010151.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010150.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010149.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010148.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010147.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010146.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010145.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010153.jpg

The next and finish is Nie 24 of Italian Air Force...

[gomidefilho]

Hello my friends!

Is my last build for the contest, finally I finish the Nieuport 24 from Italian Air Force...

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010171.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010174.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010173.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010172.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010170.jpg

http://i126.photobucket.com/albums/p101/gomidefilho/Nieuport%20Triple%20Play/P1010175.jpg

Regards! ;)

[whulsey]

Wonderful little models. Some good tips in this build thread. Thanks!

[gomidefilho]

Thank's Whulsey, is my pleasure. At the moment my work is in a Breda 65...