Moldy Crow / Milleniumfalsehood / 1:48 / Completed

[sagittarius]

There is nothing else I can say , eh eh , eh eh :D

http://www.papirove-modely.cz/img/upload/modely/moldy-crow---freemodel---1-48/20090917124529-51111-full.jpg
http://www.papirove-modely.cz/img/upload/modely/moldy-crow---freemodel---1-48/20090917124542-51112-full.jpg
http://www.papirove-modely.cz/img/upload/modely/moldy-crow---freemodel---1-48/20090917124550-51113-full.jpg
http://www.papirove-modely.cz/img/upload/modely/moldy-crow---freemodel---1-48/20090917124559-51114-full.jpg
http://www.papirove-modely.cz/img/upload/modely/moldy-crow---freemodel---1-48/20090917124605-51115-full.jpg
http://www.papirove-modely.cz/img/upload/modely/moldy-crow---freemodel---1-48/20090917124612-51116-full.jpg
http://www.papirove-modely.cz/img/upload/modely/moldy-crow---freemodel---1-48/20090917124637-51117-full.jpg
http://www.papirove-modely.cz/img/upload/modely/moldy-crow---freemodel---1-48/20090917124658-51118-full.jpg

THX MILLENIUMFALSEHOOD !!!

[doctormax]

nice looking build, it looks good to me and i am not the biggest expert in science fiction models and it is impressive to me.

[jagolden01]

Came out great! I was watching this build up.
Result shows the effort.

[gomidefilho]

Great Build!! Superb detail level. I like cockpit...

[sagittarius]

thank you guys. Compliments are always nice to hear/read :rolleyes:

[shiftdel]

Very nice and clean build, Sagitarious, the detail on this model is stunning!

Great design job from Milleniumfalsehood, I think it's the first time that I see a final bild of his model.

Congrats to you both!

[Fargo]

Very nice and clean build, Sagitarious, the detail on this model is stunning!

Great design job from Milleniumfalsehood, I think it's the first time that I see a final bild of his model.

Congrats to you both!

Quote :D :D :D
Kyle Katarn is one of my favourite characters! now it is time for the Raven's Claw!!!

http://images4.wikia.nocookie.net/starwars/images/d/d3/RavensClaw.jpg

[sagittarius]

Kyle Katarn is one of my favourite characters too , but Raven´s claw is not one of my favourite ships :D Never say never :rolleyes: Maybe if there will be Claw in 1:48 it would be nice collection. One oh the simply-shaped ships that I like from Dark forces series is Mara Jade´s Shrike . It would be simple scratch building for everyone, I think. But the prepared model would be simpler :)

Shrike (Alpha-52 starfighter) - Wookieepedia, the Star Wars Wiki (http://starwars.wikia.com/wiki/Shrike_%28Alpha-52_starfighter%29)

So here we have the challenge... :D

[Fargo]

Kyle Katarn is one of my favourite characters too , but Raven´s claw is not one of my favourite ships :D Never say never :rolleyes: Maybe if there will be Claw in 1:48 it would be nice collection. One oh the simply-shaped ships that I like from Dark forces series is Mara Jade´s Shrike . It would be simple scratch building for everyone, I think. But the prepared model would be simpler :)

Shrike (Alpha-52 starfighter) - Wookieepedia, the Star Wars Wiki (http://starwars.wikia.com/wiki/Shrike_%28Alpha-52_starfighter%29)

So here we have the challenge... :D

well, now it is my turn to say "naa, that's not my taste" about the Shrike :) but you're right, it seems not so difficult to design and build, let's save it for next year :rolleyes: we could try some kind of "collaboration"...
anyway, once again GREAT work!

[Millenniumfalsehood]

Y'know, I think I could whip up a fairly simple model of the Shrike. I'll get back to you . . .

[sagittarius]

It would be great. I can make it more realistic then. If you can grab the 3D model from the game , I´ll be very ,very happy :rolleyes:

[Millenniumfalsehood]

Actually I'll be going from this image:

http://philrivera.net/images/shrike.jpg


I figure on making it the same scale as the Crow, but with much, much lighter textures. :o

[sagittarius]

What can I say ? You are my hero :rolleyes: I was hoping about something simple. but this is absolutely amazing !!! Where did you get this 3D model ?

[Fargo]

Where did you get this 3D model ?

eheh, our friend here is a sci-fi marauder :D well, I have to admit that, seen even in this way, that ship is growing on me

[Tirick]

I am... speechless. That is an awe-inspiring model! Where, if I may ask, can this be found, purchased, or downloaded?

Wow. I have a pipe dream of making a paper Falcon in that kind of detail, but, just, wow.

Tirick

[sagittarius]

I don´t like my stand... do you have some idea how to improve it ? :confused:

[Tirick]

What don't you like about your stand? It looks pretty chrome and slick! I've experimented with printable clear acetate stands, but I've found them too flimsy for my tastes. You could always go with a Games workshop flight stand, although clearance could be an issue with that under-slung laser.

[Millenniumfalsehood]

What can I say ? You are my hero :rolleyes: I was hoping about something simple. but this is absolutely amazing !!! Where did you get this 3D model ?

Google "Mara Jade's Shrike". Its the first thing which comes up. ;)

EDIT: Here's his main page:

http://philrivera.net/rpswa/raith.htm

[sagittarius]

What about D61 ? I thing it is much more better than mine :mad::D

[Alcides]

Saittarius stuning model, very detailed, looks incredible.

one question: is the model downloadable ? Where do you get it ?

[Gearz]

WOW.. Beautiful build of a brilliantly designed model Sagittarius.!

MAX POINTS for both of you !

[Tirick]

The model is available on Zealot, in the Star Wars section.

On my list to build... eventually.

[sagittarius]

What about D61 ? I thing it is much more better than mine :mad::D

I forgot to post the link :D :D

http://pedestal.blog.cz/galerie/podstavce-base/drevene-podstavce-tvar-deska

And again - thank for compliments guys :)

[sagittarius]

So , there is the whole new stand and the final look of Moldy Crow display :rolleyes:

http://www.papirove-modely.cz/img/upload/modely/moldy-crow---freemodel---1-48/20091129232828-57303-full.jpg
http://www.papirove-modely.cz/img/upload/modely/moldy-crow---freemodel---1-48/20091129232842-57304-full.jpg

[Millenniumfalsehood]

Beautiful!

I added the Moldy Crow to the downloads section, btw. :cool:

[Vortex_4200]

what is the ETA on the Raven's Claw?

[imcold]

This stand looks way better than the previous :)