#71
|
||||
|
||||
#72
|
||||
|
||||
#73
|
||||
|
||||
Exceptional detail!
Don |
#74
|
||||
|
||||
Thanks a lot Don!
ok ok ok...skinning of the turret...it was with a bad feeling I started to skin the tower. The way to do it is unlike anything I have done beforre since there are no flat surfaces here. And the skin are divided in several parts. And of course with me not quite understand polish instructions and the messy drawings I was a bit nervous before starting the process. Started with the right side and the back. Next I have to do is to make the barrel, since it has to go into the "hinge" before skinning the left side. The barrel is about 25cm long with a diameter of 12,5mm. Problem is of course to roll such long tube....so I have to come up with a solution of making some kind of inner structure and then put the barrelskin on that...or else im afraid im getting a wrinkled barrel... Also experimented with the blue opticals...with some ovehead foil and blue spirit pencil. I think the result turned out pretty well Please tell me what you think about it!! Will try this on the rest of the periscopes and the other opticals here and there. |
#75
|
||||
|
||||
That optic looks pretty good but the proof of the pudding will be the finished result.
|
Google Adsense |
#76
|
||||
|
||||
making good progress Johnny
__________________
David........... Paper modelling gives you a happy high. currently building. c GAZ 51 ALG 17, wagon 111a. unex DH411 excavator and spitfire Mk 9 |
#77
|
||||
|
||||
Biggest barrel ever!!
Finished the barrel...monsterpiece..32cm long. Longest barrel I ever made!
First the skin is on..had to come up with a solution for something to use as inner structure. So after a lot of searching for something that was 12,5mm in diameter, I found some pencils that matched the criteria. So I wrapped the skin around the pencils (3 stk in a row) Then it was to make the "adjustable bands" around the barrel. and the coned part in the rear end. Barrel done..32cm long and 13mm in diameter Closeups of the bands6 Back and front And mounted on the turret. Rest of the skinning can start Stay tuned |
#78
|
||||
|
||||
Nicely done, that looks really good.
|
#79
|
||||
|
||||
#80
|
||||
|
||||
Continue the work with the turret...
Flare system. Need to have some small side projects going on while studying the drawings Then I got to the point where I had to put the rest of the skin on the turret...and as you can see, its not an easy task to get it to look good The last skin is big..round and not easy to handle, as in where to exact put it...have I cut the right cuts along the side?. So I was studying and thinking..and then just went for it. Glued it on in a line from front to back, then worked my way outwards. Got it placed and glued in a way that I found satisfying Also made the front covercloth.. Next was the other hatch. Still a lot of detailing to do, but the main structure is done. Then I started on some optical device...Will finish this part next week Project status Im so happy that the turret is skinned... Stay tuned |
Google Adsense |
|
|