#31
|
||||
|
||||
Dragos - I think it is internal or external house patching plaster.
__________________
The SD40 is 55 now! |
#32
|
||||
|
||||
Dragos - I managed to translate part of the bag. It is Interior Plaster. Like Polyfilla?
There are different types so you will have to experiment while fixing the house!
__________________
The SD40 is 55 now! |
#33
|
|||
|
|||
yes Kevin, you are right, it is an interior Plaster.
YOAV |
#34
|
||||
|
||||
Plaster of Paris should work also...........look around a local craft store or home supply. I've used Durham's Water Putty to do the same thing, it sets much harder than Plaster of Paris so it sands differently.......
|
#35
|
||||
|
||||
Wonderful Yoav, good to see you back again with the build of this great model!
Take care, Erik |
Google Adsense |
#36
|
|||
|
|||
continue working on the model.
After I finished working on the upper part of the central body, then it was time for the lower part of the central body. YOAV 1 mm thick strips of cardboard along the lower body. The role of cardboard strips , to allow easy paste of the parts of the lower body. The formers should be mounted between the two strips. The lower parts Although in the pictures above, we can see the formers attached to the body, I worked in a different method. At first I paste the part into his place and only then insert the former into the part ..... It is easier for me in this method. And so I went on until I finished the last parts of the lower body. The central body is finely assembled. |
#37
|
||||
|
||||
Thank you.
Interesting....
__________________
The SD40 is 55 now! |
#38
|
||||
|
||||
Looks great the coloring is outstanding
__________________
regards Glen |
#39
|
||||
|
||||
Yoav, your method of gluing the skin segments first and then placing the former is in my experience also the best method to obtain a very smooth joint between the segments as you have the space to properly put pressure on the joining strip for a good bond.
Regards, Erik |
#40
|
||||
|
||||
awesome !!!
|
Google Adsense |
|
|