PaperModelers.com

Go Back   PaperModelers.com > > >

Reply
 
Thread Tools Display Modes
  #21  
Old 05-18-2018, 10:24 PM
deckape's Avatar
deckape deckape is offline
Member
 
Join Date: Apr 2010
Location: Moraine Ohio
Posts: 2,351
Total Downloaded: 233.50 MB
Quote:
Originally Posted by MichaelS View Post
Nice work sir. Too bad about the insignia.
Ahoy Michael
Thanks buddy much appreciated this is a nice kit for certain it is hand drawn I love them they are challenging at times. I should have used my head before I started construction, to get away from back to back former construction I should have added connector tabs duck tailed out. then add the former this would rid the appearance of the formers. Thanks again my man.

Boats
__________________
TURN TWO CONTINUE SHIPS WORK
Reply With Quote
  #22  
Old 05-18-2018, 10:27 PM
deckape's Avatar
deckape deckape is offline
Member
 
Join Date: Apr 2010
Location: Moraine Ohio
Posts: 2,351
Total Downloaded: 233.50 MB
Quote:
Originally Posted by FastEddie View Post
Amazing job... Just looking and learning!
Ahoy FastEddie
thanks buddy for tuning in on the thread back to back former construction takes time and it is tedious at times but you got to work around these pesky formers. A lot of burnishing to smooth out this job. thanks man

boats
__________________
TURN TWO CONTINUE SHIPS WORK
Reply With Quote
  #23  
Old 05-18-2018, 10:29 PM
deckape's Avatar
deckape deckape is offline
Member
 
Join Date: Apr 2010
Location: Moraine Ohio
Posts: 2,351
Total Downloaded: 233.50 MB
Quote:
Originally Posted by Rata View Post
You make complexity look easy. Nice work mate.
Ahoy Rata
thanks buddy much appreciated, the build is going good now the hard spots are over with down hill swing now stay posted more pix coming tomorrow. thanks Rata.

Boats
__________________
TURN TWO CONTINUE SHIPS WORK
Reply With Quote
  #24  
Old 05-19-2018, 08:41 PM
deckape's Avatar
deckape deckape is offline
Member
 
Join Date: Apr 2010
Location: Moraine Ohio
Posts: 2,351
Total Downloaded: 233.50 MB
Fuselage continued

Ahoy Paper Wrights

Update build report for today did not get to much done today I had to toil at work. now back t the bench got a little done thus far guys I have the after burner assembly has been installed leving all is left on the fuselage is the pilots compartment I will be on that next I removed the top flap over the pilots compartment. Next the installation of same will be done and this will conclude the entire fuselage assembly the fun part next will be the under carriage so she can stand up[ proud.

since a great deal of the airplane is done the remainder of parts will present no fit issues.

boats
Attached Thumbnails
Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2612.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2613.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2614.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2615.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2616.jpg  

Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2617.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2618.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2619.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2620.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2621.jpg  

Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2623.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2624.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2625.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2626.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2627.jpg  

Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2628.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2629.jpg  
__________________
TURN TWO CONTINUE SHIPS WORK
Reply With Quote
  #25  
Old 05-20-2018, 09:06 AM
Butelczynski's Avatar
Butelczynski Butelczynski is offline
Member
 
Join Date: Jun 2017
Location: Brampton ,Ontario
Posts: 741
Total Downloaded: 43.27 MB
I admire your stubbornness.I tried to build this model when it came out and failed due to really badly fitting parts (or not fitting at all).I abandoned jets after that.

Will be interesting to see it completed.Good luck.
Reply With Quote
Login to remove ads
  #26  
Old 05-21-2018, 01:27 PM
deckape's Avatar
deckape deckape is offline
Member
 
Join Date: Apr 2010
Location: Moraine Ohio
Posts: 2,351
Total Downloaded: 233.50 MB
Under carriage assembly

Ahoy paper wrights
another update here for today, the next update will be the final reveal. for today got her legs on they were simple enough to say the least they are assembled now she stands proud ready for the ordnance and canopy and she is complete. in over view of the kit in general not a good kit it looks impressive when you review the printing and the kit but when it comes time for the construction its another story I have built worse but this kit is in and out of fit parts some are good and others are not so don't give up its expected. The wheels are made from card board disc sanded to shape colored in and installed.

boats
Attached Thumbnails
Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2630.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2631.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2632.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2633.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2634.jpg  

Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2635.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2636.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2637.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2638.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2639.jpg  

Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2640.jpg  
__________________
TURN TWO CONTINUE SHIPS WORK
Reply With Quote
  #27  
Old 05-21-2018, 01:34 PM
elliott elliott is online now
Design Moderator
 
Join Date: Oct 2007
Posts: 8,370
Total Downloaded: 6.46 GB
Looks good Boats, in spite of the difficulties with the back-to-back formers. You've come back nicely I must say. Looking forward to tomorrow's reveal.
__________________
This is a great hobby for the retiree - interesting, time-consuming, rewarding - and about as inexpensive a hobby as you can find.
Shamelessly stolen from a post by rockpaperscissor
Reply With Quote
  #28  
Old 05-21-2018, 03:59 PM
modelperry's Avatar
modelperry modelperry is offline
Member
 
Join Date: Feb 2008
Location: Burlington, Iowa
Posts: 1,898
Total Downloaded: 7.57 MB
Congratulations on beating this Bodhan design into submission!

Greg
__________________
In dry dock: Antilope. In factory: Famo Sdkfz 9. In hanger: Yak 7b. under construction: ?
Reply With Quote
  #29  
Old 05-22-2018, 09:50 PM
deckape's Avatar
deckape deckape is offline
Member
 
Join Date: Apr 2010
Location: Moraine Ohio
Posts: 2,351
Total Downloaded: 233.50 MB
She is done

Ahoy Paper wrights
Here is the Final Reveal for the F5 Tiger 11 finished her up today time to start another build thread. Before I add the final reveal I like to Thank STRATOART for the kit much appreciated I will display this at next years convention. also all the views and replies on the thread. As for the model not bad the fit of parts are not that good in overall view skins and formers are in and out so you got to trim to fit as you build I should have carved me a balsa plug for the canopy but for the heck of it I did the kits canopy a little rough like a cobb maybe before next year I will vacu form me a canopy for the F5. Started to take some outside pictures it started to rain and that scrubbed that. Here are the finished pictures time to drag out another build.

Boats
Attached Thumbnails
Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2641.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2642.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2643.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2644.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2645.jpg  

Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2646.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2647.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2648.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2649.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2650.jpg  

Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2651.jpg   Maty Modelarz 1/33 F-5 Freedom Fighter-sam_2652.jpg  
__________________
TURN TWO CONTINUE SHIPS WORK
Reply With Quote
  #30  
Old 05-22-2018, 11:27 PM
Rata's Avatar
Rata Rata is offline
Member
 
Join Date: Mar 2018
Location: Sydney, Australia
Posts: 1,640
Total Downloaded: 251.26 MB
Top build fella!! Looks cool in that camo finish.
__________________
''Oh, stop whining! Can't you just print off another one?''- my wife ca 2018
Reply With Quote
Login to remove ads
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:53 AM.


Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Resources saved on this page: MySQL 8.33%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
Copyright © 2007-17, Paper Modelers.com