#71
|
||||
|
||||
a spelling correction
The first sentence of the previous post should have started as :
I wanted to demonstrate the way the main gear retract.... Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#72
|
||||
|
||||
Main gear struts
The struts are wood dowels with metal pins on either end
Here is the pivot ( also wood dowel with pin thru the side into the wing spar ) and the main struts now glue in place here are the wheel axle ( bent paper clip ) test fit with the wheel. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#73
|
||||
|
||||
Wheels shaping
Recall that the resin wheels I am using are from an F-4 Phantom. The shape of those tires are rather square and need rounding.
I drilled out the center to accept a mounting screw mount it on my mini lathe and sand the wheel to rounded shape here is a before and after sanding Now paint the wheels. I use Tamiya paints Ready to go Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#74
|
||||
|
||||
Main wheels on
At this point, I glued a wooden short dowel back into the center hole, glued the axles using super glue and then onto the axles.
Notice that at this point there is no detailing to the struts. I will add some on later on after the model is on its landing gear. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#75
|
||||
|
||||
Nose gear
The nose gear is similar in construction to the main. However, there is an extra axle to support the twin wheels.
Wheels and strut initial assembly dry fit and trim to the proper height glue to the fuselage and here it is on its gear: Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
Google Adsense |
#76
|
||||
|
||||
Landing gear doors, struts and details
Here is where I add the finishing details. Some parts that were too small or cant be seen are omitted.
mains and the nose gear Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#77
|
||||
|
||||
A typically high standard of build and detail, nice one.
|
#78
|
||||
|
||||
The 'feet and legs' look great. That lathe is a nice machine.
Keep up the great work! Gary
__________________
"Fast is fine, but accuracy is everything" - Wyatt Earp Design Group Alpha https://ecardmodels.com/vendors/design-group-alpha |
#79
|
||||
|
||||
Guns
thank you guys for following this build.
The last detail for now are the guns. They are made of painted wood dowels. At this point the work on this model is done. There is still the small bomb, rack and antenna wires, but for now, they are omitted since I am bringing it to the US Air Force Museum this Saturday as part of my paper plane display and talk about early jet development. Paper models at USAF museum family day Aug 18 Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#80
|
||||
|
||||
Model finished
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
Google Adsense |
|
|