PaperModelers.com

Go Back   PaperModelers.com > Card Models > Model Builds > Aviation

Reply
 
Thread Tools Display Modes
  #41  
Old 07-06-2019, 10:24 AM
MacSongLi's Avatar
MacSongLi MacSongLi is offline
Member
 
Join Date: May 2012
Location: Ontario, Canada
Posts: 5,977
Total Downloaded: 912.66 MB
The fuselage looks nice and straight. Adding the sticks obviously helped.


Gary
__________________
"Fast is fine, but accuracy is everything" - Wyatt Earp

Design Group Alpha
https://ecardmodels.com/vendors/design-group-alpha
Reply With Quote
  #42  
Old 07-06-2019, 11:15 AM
Isaac's Avatar
Isaac Isaac is offline
Member
 
Join Date: Oct 2010
Location: Florida
Posts: 8,810
Total Downloaded: 679.43 MB
Exclamation Horizontal fins

The horizontal tail fins are built in a similar fashion as the vertical.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9889.jpg

Only addition is the small fairing that attached to the fuselage
Tsybin NM-1 MaksArt model in 1/33 scale-img_9890.jpg


here are the parts
Tsybin NM-1 MaksArt model in 1/33 scale-img_9891.jpg



fairing glued on to the aft fuselage
Tsybin NM-1 MaksArt model in 1/33 scale-img_9895.jpg


dry fit only.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9896.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9897.jpg



dry fit look with the vertical fin as well.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9899.jpg


It will be glued on later after the wings.



Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500]
Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint
Reply With Quote
  #43  
Old 07-07-2019, 09:18 AM
Isaac's Avatar
Isaac Isaac is offline
Member
 
Join Date: Oct 2010
Location: Florida
Posts: 8,810
Total Downloaded: 679.43 MB
Exclamation Wings

The wings are long in chord and short in span. They are also sharp at the leading edge, so there is nothing to round there. The control surfaces are added later.

Here is the inner wing support. My only addition is a wood dowel for additional strength and also to prevent the wings from flopping down when the tip engines go on.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9900.jpg


here are the wing upper and lower skins to be joined at the sharp leading edge
Tsybin NM-1 MaksArt model in 1/33 scale-img_9901.jpg

I added a folded over joining strip in the front.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9902.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9903.jpg

first wing is joined
Tsybin NM-1 MaksArt model in 1/33 scale-img_9904.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9905.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9906.jpg

both wings are joined
Tsybin NM-1 MaksArt model in 1/33 scale-img_9907.jpg


now glue the frame into the fuselage
Tsybin NM-1 MaksArt model in 1/33 scale-img_9908.jpg


insert the wood dowel and glue in place.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9909.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9910.jpg

I usually cover the framing top and bottom with an extra sheet to help guide the wing skin over the frame and also smooth out the wrinkles.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9911.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9912.jpg


ready to glue the wings on.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9913.jpg



note: apply glue only to the wing inner edge and outer edge over where those ribs are located. This way the skins will not wrinkle due to gluing
Tsybin NM-1 MaksArt model in 1/33 scale-img_9914.jpg



both wings are on.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9915.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9916.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9917.jpg


Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500]
Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint
Reply With Quote
  #44  
Old 07-07-2019, 09:41 AM
Isaac's Avatar
Isaac Isaac is offline
Member
 
Join Date: Oct 2010
Location: Florida
Posts: 8,810
Total Downloaded: 679.43 MB
Exclamation Wings finishing touch

There are multiple wing surface strips glued on top. Those are most likely structural adder on the real plane at high stress areas. They do add a 3D affect to an otherwise flat surface. Only note is that the rivet lines again are not consistent.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9918.jpg
Tsybin NM-1 MaksArt model in 1/33 scale-img_9919.jpg

Tsybin NM-1 MaksArt model in 1/33 scale-img_9920.jpg


see the rivet lines?
Tsybin NM-1 MaksArt model in 1/33 scale-img_9921.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9922.jpg


and now add the super long wing fillets. Even though they are long, apply the glue only in short runs and press down till done.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9923.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9924.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9925.jpg


Only other detail not shown here are the 3 small fairing for the control actuators on the bottom trailing edge of the wings ( I will take a photo later on ).



Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500]
Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint
Reply With Quote
  #45  
Old 07-07-2019, 09:46 AM
Isaac's Avatar
Isaac Isaac is offline
Member
 
Join Date: Oct 2010
Location: Florida
Posts: 8,810
Total Downloaded: 679.43 MB
Exclamation Wing control surfaces

I am not sure if these are full span ailerons or inner flaps and outer ailerons or a combination since I did not research that aspect further. In any case here they are, one surface per wing.


My only addition is to insert a wood dowel cut to length to give the forward edge its shape and keep the surface straight.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9927.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9928.jpg

Tsybin NM-1 MaksArt model in 1/33 scale-img_9929.jpg
Tsybin NM-1 MaksArt model in 1/33 scale-img_9930.jpg


glued on.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9932.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9933.jpg


Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500]
Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint
Reply With Quote
Google Adsense
  #46  
Old 07-07-2019, 10:05 AM
MacSongLi's Avatar
MacSongLi MacSongLi is offline
Member
 
Join Date: May 2012
Location: Ontario, Canada
Posts: 5,977
Total Downloaded: 912.66 MB
Nice job, Isaac. The fit looks nice and tight.


Gary
__________________
"Fast is fine, but accuracy is everything" - Wyatt Earp

Design Group Alpha
https://ecardmodels.com/vendors/design-group-alpha
Reply With Quote
  #47  
Old 07-07-2019, 01:13 PM
Vinalssergio155's Avatar
Vinalssergio155 Vinalssergio155 is offline
Member
 
Join Date: Jan 2018
Location: Ezeiza.Argentina
Posts: 3,434
Total Downloaded: 331.88 MB
Great, it looks great.
Reply With Quote
  #48  
Old 07-07-2019, 05:12 PM
Isaac's Avatar
Isaac Isaac is offline
Member
 
Join Date: Oct 2010
Location: Florida
Posts: 8,810
Total Downloaded: 679.43 MB
Cool Status pics

Pics of the plane so far.


Tsybin NM-1 MaksArt model in 1/33 scale-img_9942.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9943.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9945.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9946.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9947.jpg

Tsybin NM-1 MaksArt model in 1/33 scale-img_9948.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9949.jpg

Tsybin NM-1 MaksArt model in 1/33 scale-img_9951.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9952.jpg


Engines next.


Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500]
Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint
Reply With Quote
  #49  
Old 07-08-2019, 08:04 AM
Isaac's Avatar
Isaac Isaac is offline
Member
 
Join Date: Oct 2010
Location: Florida
Posts: 8,810
Total Downloaded: 679.43 MB
Cool Right side engine

The engines on this plane are tip mounted. The kit provides a left and a right engine ( the designer just mirrored the page to produce an opposite engine ) . Make sure you know which is which ( a clue is a red thin side strip that shows on the outer side for each engine ).


The usual round cylinders and cones
Tsybin NM-1 MaksArt model in 1/33 scale-img_9956.jpg

here is the inlet
Tsybin NM-1 MaksArt model in 1/33 scale-img_9957.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9958.jpg



exhaust section
Tsybin NM-1 MaksArt model in 1/33 scale-img_9959.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9960.jpg



center section
Tsybin NM-1 MaksArt model in 1/33 scale-img_9961.jpg


all 3 main engine nacelle parts
Tsybin NM-1 MaksArt model in 1/33 scale-img_9963.jpg


and glued
Tsybin NM-1 MaksArt model in 1/33 scale-img_9964.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9965.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9966.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9967.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9968.jpg



Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500]
Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint
Reply With Quote
  #50  
Old 07-08-2019, 08:27 AM
Isaac's Avatar
Isaac Isaac is offline
Member
 
Join Date: Oct 2010
Location: Florida
Posts: 8,810
Total Downloaded: 679.43 MB
Exclamation Engine continued

dry fit the engine to the wing tip. Looks OK
Tsybin NM-1 MaksArt model in 1/33 scale-img_9969.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9970.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9971.jpg



Add the external details. Scoops, landing gear fairing, doubler patches.
Tsybin NM-1 MaksArt model in 1/33 scale-img_9972.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9973.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9974.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9975.jpg


here is the short spar and outer fin
Tsybin NM-1 MaksArt model in 1/33 scale-img_9976.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9977.jpgTsybin NM-1 MaksArt model in 1/33 scale-img_9978.jpg



assembly is ready
Tsybin NM-1 MaksArt model in 1/33 scale-img_9979.jpg


Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500]
Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint
Reply With Quote
Google Adsense
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:10 AM.


Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
Copyright © 2007-2023, PaperModelers.com