#1
|
||||
|
||||
Tsybin NM-1 MaksArt model in 1/33 scale
I have downloaded MaksArt model of this unusual research aircraft ( Tsybin NM-1 ). Same designer as some of my previous builds of the Yak 19, 25, 30 ist generation as well as the Yak 1000. I decided to build this one as it is relatively simple, yet impressive. I have other models to build, but most are more complicated, and just coming off the YAK 25M build, I needed a brain rest.
Apparently the model was built and a quick blurb was posted with a link to You Tube, but that is gone. This is of the Extra Model printed kit which I think is the MaksArt version repainted. Tsybin NM-1,1:33 Also, there is thread on the 1/100 scale Odball version which is similar, but different build. Tsybin NM-1 - Oddball - 1/100 More soon Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
Google Adsense |
#2
|
||||
|
||||
Good project, luck. Do I see bad or say 806mm?
|
#3
|
||||
|
||||
Yes, it will be a long airplane model. But relatively short wings.
Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#4
|
||||
|
||||
Isaac,
Did you use the Japanese extra white paper to print on? I'm assuming it's metric dimension paper? Thanks, Gary
__________________
"Fast is fine, but accuracy is everything" - Wyatt Earp Design Group Alpha https://ecardmodels.com/vendors/design-group-alpha |
#5
|
||||
|
||||
Quote:
Yes, I use the Japanese A4 paper since the kit is designed to use all the length. Same paper I always use for my digital file printing. In case you wish to purchase it, here is my previous thread on that topic: A4 card stock in the USA It is available in the USA and Canada as well Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
Google Adsense |
#6
|
||||
|
||||
Wing tip engine concepts
The Tsybin aircraft here was intended as a supersonic ( mach 3 really ) aircraft. Of interest is that the engines were podded on the wing tips ( or very near the tips ) as in a few other concept planes of the period such as :
Avro 730 French Trident German VTOL aircraft VJ 101 and to a lesser degree a Bristol 188 While installation of the engines on the wing tips is relatively simple, I am sure that there are other complications, most noteably is the one engine out especially on take off. More info on the aircraft: https://en.wikipedia.org/wiki/Tsybin_RSR https://www.youtube.com/watch?v=xvy5jAfC10s Anyhow, all fun stuff Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#7
|
||||
|
||||
Very interesting, thanks for the information. Align such an extensive fuselage, let's hope it does not get complicated.
|
#8
|
||||
|
||||
Quote:
Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#9
|
||||
|
||||
The kit
The kit consists of 20 pages total that break down as follows:
1 cover page 2 info pages in Russian 4 sketches and views/instructions 3 frame pages 9 part pages 1 back page with photos of completed model and a listing of MaksArt previous kits Here are some representative pages. Note: Printing must be on A-4 paper in order for the large parts to fit at this scale ( parts and frames only; the rest can be omitted or printed on any size and used for reference only). also I used 160 gr paper, however in hindsight because of the super big pieces for the fuselage, A heavier paper is better in my opinion. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#10
|
||||
|
||||
Quote:
Available in Canada you say? Please let me know a source in Canada to try. Shipping from the USA was going to be $100 US for one package of paper. Looks like a great model - will be watching your work with interest. Regards, John |
Google Adsense |
|
|