#11
|
||||
|
||||
Fuselage joined
Here are the forward and aft fuselage sections
joined aft of the second cockpit and at this point, add the butterfly tail support and close up the rear fuselage. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#12
|
|||
|
|||
Great modeling Isaac, you have a very fast rate of building.
Shalom Mor |
#13
|
||||
|
||||
The fuselage looks great, Isaac.
Gary
__________________
"Fast is fine, but accuracy is everything" - Wyatt Earp Design Group Alpha https://ecardmodels.com/vendors/design-group-alpha |
#14
|
||||
|
||||
Engine nacelles
The Tzukit / Fouga was a mid wing design powered by two tiny Marbore II engines of less than 1,000 lbs thrust each . The Marbore engine was the basis of a license version to the USA manufacturer Teledyne J69 engine which powered the Cessna T-37 Tweety bird trainer among others
https://en.wikipedia.org/wiki/Turbomeca_Marbor%C3%A9 The actual engines were mounted in a side cheek nacelle behind the wing root with the air inlet extending in front of the wing via an air tube that went thru the wing spar within the nacelle. Here is the inlet the inner lining is inserted from behind using a wood stick with a drop of glue to keep it in place. continue the nacelle going aft Notice, I will build landing gear bays into the wings. However, The current spar design interferes with the cutout and I have to figure out how to build the wings and support them. For now, I used temporary wood sticks for the spars engine exhaust personal note: There are no shaping formers in the nacelles and I thought that the shape may not be good. However, I was surprised that even with no internal structure the simplicity and ease of build kept its proper shape. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#15
|
||||
|
||||
The model is executed beautifully and smoothly
|
Google Adsense |
#16
|
|||
|
|||
Hi Issac,
It is always nice to see your models . This model looks great |
#17
|
||||
|
||||
Status-1
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#18
|
||||
|
||||
Status pics-2
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#19
|
||||
|
||||
seats and status
The seats are inserted in place.
Note: Yoav went into all the details of building the model, so I am only posting specific levels of the build. Here it is: and the entire fuselage ready for the canopy. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#20
|
||||
|
||||
Impressive quality and speed of construction Isaac. It looks magnificent.
|
Google Adsense |
Thread Tools | |
Display Modes | |
|
|