PaperModelers.com

Go Back   PaperModelers.com > Card Models > Model Builds > Civilian Wheels

Reply
 
LinkBack Thread Tools Display Modes
  #21 (permalink)  
Old 11-15-2011, 07:01 AM
Nazgul's Avatar
Member
 
Join Date: Jun 2009
Location: The pearl of the Indian ocean
Posts: 262
Total Downloaded: 0
Send a message via MSN to Nazgul Send a message via Yahoo to Nazgul
I actually have found that the Yamaha models are very well thought out. I've never come across any fitting issues, even with the MT 01 templates in several parts....Though their latest VMax had a few problems (I later heard that they updated the files to address these)

But it is possible for the scale to be 'off' if you printed the parts at different times (my printer used to do that) but you should be ok if you printed all in one go.
__________________
VIRAJ

See stuff I've built HERE
See my current build Mille Miglia
Reply With Quote
  #22 (permalink)  
Old 11-15-2011, 08:43 AM
Member
 
Join Date: Oct 2011
Location: Bristol
Posts: 222
Total Downloaded: 32.86 MB
hi people
Nazgul.... yes all printed together.. although on previous models I had to 'reprint' the odd sheet and that turned out ok.....
the exhaust was the main one here and for the model it does seem a little 'large bore'




regards
don

Last edited by dondecap; 11-15-2011 at 08:47 AM. Reason: add pic.
Reply With Quote
  #23 (permalink)  
Old 11-15-2011, 08:51 AM
NStarkel's Avatar
Member
 
Join Date: Apr 2011
Location: North Florida
Posts: 1,367
Total Downloaded: 0
So far so good!
__________________
............/_6__\)>=-----= My favorite site>http://www.papertigerarmaments.com/
.......\_#______*\-
.......(*ooooooo*)
####################
Reply With Quote
  #24 (permalink)  
Old 11-15-2011, 03:14 PM
Member
 
Join Date: Oct 2011
Location: Bristol
Posts: 222
Total Downloaded: 32.86 MB
hi people,
update pic.........
just the wheels to do now.....



regards
don
Reply With Quote
  #25 (permalink)  
Old 11-16-2011, 04:48 AM
Member
 
Join Date: Oct 2011
Location: Bristol
Posts: 222
Total Downloaded: 32.86 MB
hi people.
front tyre and rim ....



regards
don
Reply With Quote
Login to remove ads
  #26 (permalink)  
Old 11-16-2011, 03:44 PM
Member
 
Join Date: Oct 2011
Location: Bristol
Posts: 222
Total Downloaded: 32.86 MB
hi people.
a retake on the front wheel................ was not happy with it so printed another............



in the fore ground. a card roll center for the rim to sit in......a cheat perhaps ????



does the job though I think............

regards
don
Reply With Quote
  #27 (permalink)  
Old 11-17-2011, 02:08 PM
Member
 
Join Date: Oct 2011
Location: Bristol
Posts: 222
Total Downloaded: 32.86 MB
hi people.
not the recommended way.......... but..........spokes in front wheel. awaiting hub....at pencil.....


and with the hub fitted


I may try the recommended way later.......
regards

Last edited by dondecap; 11-17-2011 at 02:56 PM.
Reply With Quote
  #28 (permalink)  
Old 11-18-2011, 01:59 PM
Member
 
Join Date: Oct 2011
Location: Bristol
Posts: 222
Total Downloaded: 32.86 MB
hi people.
rear wheel update............



waiting for tread.


regards
don
Reply With Quote
  #29 (permalink)  
Old 11-18-2011, 03:23 PM
richkat's Avatar
Member
 
Join Date: Aug 2010
Location: Rhome Texas, northwest of Fort Worth
Posts: 2,975
Total Downloaded: 65.56 MB
Don...looking good! how is it made?...Rich
__________________
F-1 Rules
Reply With Quote
  #30 (permalink)  
Old 11-18-2011, 04:37 PM
Member
 
Join Date: Oct 2011
Location: Bristol
Posts: 222
Total Downloaded: 32.86 MB
hi people,
richkat, a card ring the internal size the same as the rim of wheel then make rim and install in ring, then thread the cotton under the rim and out the spoke position and glue the end to the outside of ring, then out the spoke position opposite and out under the rim glue end to card ring.
then put on the 'tyre' and install the hub tightens the 'spokes' , does not look so good as the recommended way with 3 or 4 spoke weave but does the job.

regards
don
Reply With Quote
Login to remove ads
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 10:12 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.2