|
|
|
#31
05-21-2017, 01:11 AM
|
||||
|
||||
|
Hello everybody
The upper edges are now dressed step by step with a 0.8 mm wide strip At the driver's door I can close the joints. The rear fenders ... ... before, however, the substructure has to be glued to the chassis, the pass accuracy being outstanding! Best regards Kurt 
|
|
#33
06-05-2017, 04:03 AM
|
||||
|
||||
|
ciao Tonino ,
grazie mille  Hello ! After a bike break now again a bit model building ......... Glue the rear fender and glue the inner edge in layers with glue. The front fender consists of five parts, first I connect the two inner parts with three small tabs. Now close the part and glue into the wheel box. Now fix the inner fender, then the outer fenders first at the back and allow to dry well. Best regards Kurt
|
|
#34
06-10-2017, 01:20 AM
|
||||
|
||||
|
Hello ,
The fender must be pre-formed properly. Now step by step with small tabs glue. Thus, the front fenders are also finished, which are quite demanding to build. My attempt to build this paint with edges is not so badly succeeded. Parts 157 to 160, the two water hoses, mounted on the footboard Kind regards Kurt
|
|
#35
06-18-2017, 11:54 PM
|
||||
|
||||
|
After a break again ...
The wooden roof rack is glued up step by step, the spare wheel is placed in between. The radiator ribs on the bonnet are glued individually From now on, he stands on his own legs. Kind regards Kurt
|
| Google Adsense |
|
#37
06-22-2017, 07:27 AM
|
||||
|
||||
|
Beautiful work!!!
Milan
|
|
#38
06-27-2017, 11:32 AM
|
||||
|
||||
|
Hello friends !
Thanks for comments to Tonino and Milan Now the small parts come to the row. The parts for the two ladders are reinforced and assembled. There are small parts like number plate and handles. The stirrups are mounted at the rear. The folding steps are also installed at the rear. Best regards Kurt
|
|
#39
06-28-2017, 11:32 AM
|
||||
|
||||
|
Hello !
The three roof beams are again filigree model building, mounted on the roof. Parts 175 with four wires, placed in the holder, it follows the railing ... ... for the back up. Now the two ladders can also be placed. Eighteen times part 108, the hinges for the seven doors. Best regards
|
|
#40
06-28-2017, 11:39 AM
|
||||
|
||||
|
Very nice work. Do you have a trick for rolling the hinges?
__________________
A fine is a tax when you do wrong. A tax is a fine when you do well.
|
| Google Adsense |
 |
|
|
Linear Mode
