#1
|
|||
|
|||
Translation of Ripperworks directions question
I have a few RipperWorks models I want to build and I have been able to decipher most everything needed except for the first statement in each instruction which is the same for every model.
I used Google translate and it goes like this: "Glue the parts marked * with a quarter, the parts marked ** 2 quarters." The subsequent instructions describe the cardboard thickness required which I can understand. 0,5** designated at .5mm ** designated at 1mm 1,5** designated at 1.5mm 2** designated at 2mm 3** designated at 3mm There are a few parts marked with one * and I'm just now sure what to do with them. I may try to contact RipperWorks, but not sure how that would go, thought may be someone here had built one of them. Thanks for any advice! Tony |
Google Adsense |
#2
|
||||
|
||||
just the one * is usually stick on the same thickness paper that the model is printed on. but haven't done a ripperworks model so i may be wrong
__________________
David........... Paper modelling gives you a happy high. currently building. c GAZ 51 ALG 17, wagon 111a. unex DH411 excavator and spitfire Mk 9 |
#3
|
|||
|
|||
If you take a look at papirovemodelarstvi dot cz and go to the heavy vehicles, trucks or any of the underneath threads you will find a myriad of Ripper models and all executed in the finest manner. But the homepage of the publisher also offers fine reviews and relatively detailed pics.
|
#4
|
|||
|
|||
cool, Thanks!
Quote:
There are lot of things to look at there, thanks so much for the link! |
|
|