PaperModelers.com

Go Back   PaperModelers.com > > >

Reply
 
Thread Tools Display Modes
  #1  
Old 11-07-2014, 09:08 AM
airdave's Avatar
airdave airdave is offline
Member
 
Join Date: Apr 2009
Location: Ontario Canada
Posts: 11,356
Total Downloaded: 95.53 MB
1/33 Harvard Mk.IV Exhaust Assembly Instructable

Obviously the Harvard and Texan are basically the same plane.
Built from the same plans anyway...although the Harvards were built in Canada
by two different companies under license from North American Aviation.

The most widely used Harvard being the Mk.IV version built by the Canadian Car & Foundry Co. (in Ontario).

Up to now I have only produced AT6 Texan kits.
These of course, were originally based on Ken Uhrig's Harvard Mk.IV paper model.
I helped Ken digitize his Harvard kit and ended up with a whole new version in digital vector format.

Recently I started work on an update of Ken's old Harvard kit (at his request) and I am helping him put out a new version
of his model. In return he has given me his blessing to release some Harvards and I am starting with a kit I created when
I was first creating my Texan.
I'll be releasing that kit very soon.


One of the interesting things about the Harvard, is the modified exhaust system.
The "cold weather exhaust" features a much longer outlet pipe, that runs down the side of the fuselage.
Inside this lengthened exhaust pipe is a smaller tube that is open at the front of the aircrcaft to allow
outside air in...and it directs air into the cabin of the aircraft. Because the smaller tube runs the length of the main exhaust pipe,
it is heated by the exhaust gases, and in turn heats the air entering the cabin.

My Harvard kit has a simplified version of the "cold weather exhaust".




Assembling the cold weather exhaust is a tad more difficult than the AT6 exhaust.
It is five pieces (instead of one).
These are small pieces with some very thin sections, requiring some very careful cutting.
The parts easily "butt" together, with no tabs or special attachments, but their small size demands patience and concentration.

You also need to make sure the parts are properly aligned during assembly,
and shape and trim the outlet part (before installation).

The kit includes basic assembly instructions for the Exhaust, but I decided to go a little further.
I have created a diagram sheet with a bit more information
and provided some photos of the completed exhaust from various angles.

(The photos are black and white to represent any Harvard kit)

Download a larger version (PDF) of this instructable: Harvard Exhaust Assembly









__________________
MY DESIGNS & FREE STUFF: cutandfold.info

Last edited by airdave; 11-07-2014 at 09:34 AM.
Reply With Quote
Login to remove ads
  #2  
Old 11-07-2014, 09:27 AM
MacSongLi's Avatar
MacSongLi MacSongLi is offline
Member
 
Join Date: May 2012
Location: Ontario, Canada
Posts: 3,369
Total Downloaded: 222.47 MB
Hey, this is great Dave. It will definitely help dummies like me out!

Thanks,
Gary
__________________
"Fast is fine, but accuracy is everything"
- Wyatt Earp
Reply With Quote
  #3  
Old 11-07-2014, 11:30 AM
elliott elliott is offline
Design Moderator
 
Join Date: Oct 2007
Posts: 7,656
Total Downloaded: 5.85 GB
Instructions! I love instructions, the more the better.
__________________
This is a great hobby for the retiree - interesting, time-consuming, rewarding - and about as inexpensive a hobby as you can find.
Shamelessly stolen from a post by rockpaperscissor
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:30 AM.


Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Resources saved on this page: MySQL 11.76%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
Copyright © 2007-17, Paper Modelers.com