PaperModelers.com

Go Back   PaperModelers.com > >

Reply
 
Thread Tools Display Modes
  #41  
Old 01-29-2017, 11:55 PM
herky's Avatar
herky herky is offline
Member
 
Join Date: Mar 2011
Location: new zealand
Posts: 5,475
Total Downloaded: 450.36 MB
Quote:
Originally Posted by Rangerdog View Post
Herky,

I also received the model files for the entire F-100 series without assembly photos / instructions.
One the website, click on the blue lettering between the title of the model & the first photo of the finished bird. It's there on most of them. It should open to a new page with a sequence of assembly photos.

I selected all of them, did a COPY, then PASTEd them into an open blank MS Word doc. Saved that with title of "F-100 Assy Instns" in the folder w the rest of the F-100 files.
thanks for the info
__________________
Carborundum Illegitimi Ne
Herky
Reply With Quote
  #42  
Old 01-30-2017, 01:13 AM
McTschegsn's Avatar
McTschegsn McTschegsn is offline
Member
 
Join Date: Feb 2015
Location: Dietzenbach, Germany
Posts: 353
Total Downloaded: 270.29 MB
I used to print the Webpages as PDF
__________________
Cheers from germany, Chris

Currently building: Colonial Viper from Uhu02
Finished:
Yoav Hozmis Kfir
Reply With Quote
  #43  
Old 02-01-2017, 11:59 AM
Ofanim's Avatar
Ofanim Ofanim is offline
Member
 
Join Date: Nov 2013
Location: Toulouse - France
Posts: 558
Total Downloaded: 525.52 MB
Hi everyone ! Two more Lightnings have been added.
Best regards,
Ronan
Attached Thumbnails
New Models from TSMC-dsc_7974mm.jpg   New Models from TSMC-dsc_8233m.jpg  
__________________
-Work in progress : too many WIP
-Previous build : Bruno's Lockheed F-104G Belgian Air Force Tiger Meet 1/100
-Next build :
Reply With Quote
  #44  
Old 02-01-2017, 07:01 PM
herky's Avatar
herky herky is offline
Member
 
Join Date: Mar 2011
Location: new zealand
Posts: 5,475
Total Downloaded: 450.36 MB
Quote:
Originally Posted by Ofanim View Post
Hi everyone ! Two more Lightnings have been added.
Best regards,
Ronan
yup they said in email there were two more comming
__________________
Carborundum Illegitimi Ne
Herky
Reply With Quote
  #45  
Old 11-29-2017, 08:44 AM
JohnMGD's Avatar
JohnMGD JohnMGD is offline
Member
 
Join Date: Jul 2007
Location: Landgraaf, Netherlands
Posts: 433
Total Downloaded: 35.41 MB
Quote:
Originally Posted by rmks2000 View Post
Instructions as per Google Translate:

General remarks
1. Cut out parts as accurately as possible. However, some derailment is no problem in the margin portion.
2. When bonding, make sure the exterior shape and panel line are precisely aligned so that there is no misalignment.
3. Adhesion surely. But be careful not to soil the surface with adhesive.
4. The example of production was made from thin paper photo paper for inkjet of Kokuyo thickness t 0.15 mm.
(It is recommended that the surface coat is unlikely to break) There are parts that are difficult to bend when made from thick paper.

□ Assembling procedure
<I have lost all the pictures taken of the assembly procedure. Please wait for a while because we are taking a shot now. >

1. Cut the left side of the fuselage and the right side of the fuselage and perform rounding. 3.4. Fuselage Back Molding Plate Bonds the left and right sides and presses them with a spatula or the like to form a valley between the two engines. Attach the Norishiro on the left and right body.

5. On the fuselage frame, 6. in the fuselage frame, 7) bend the bottom of the fuselage frame and assemble it.

Adhere 5.6.7. To the inside of the fuselage. Working becomes easier if the body is rounded firmly.

8. Assemble the front leg box and bond it to the body.

9. Adhere and cone the Mach cone. 11. Parts A, 12. Adhere part B to a cylindrical shape.

12. Parts C and 13. 13. Attach the parts 10 so that the inside of the 10 is concentric, 11. 11. Please attach 1 g weight to the inside of part B. 11. Adhere 9. to the tip of 11..

Attach the finished air inlet block to the front of the fuselage.

14. Assemble the fuselage and bond it to the fuselage. 14. Part of the rear part of R at the rear is wrapped around a thin piano wire and molded firmly.

15. Assemble the canopy and bond it to the fuselage.

16. Assemble the vertical stabilizer. 16. Attach to the fuselage. In that case, prevent the vertical tail from collapsing by inserting a spatula or the like from the inside.

17. Assemble the fuselage back frame. 17. Adhere to the back of the fuselage. Since the paper repulsion is strong, it is necessary to suppress it with something while the adhesive cures. In the photograph, two round bars of φ10 are inserted and the indentation between the engines is held with round chopsticks.

18. Wound the tail pipe in a cylindrical shape and bond it. In that case, fold out the part which becomes outside. 19. Adjust the variable nozzle and 20. reheat to 18.

21. On the main wing frame 23.24. Attach the main wing frame guide and decide the lower half corner of the main wing. 22. Glue the lower wing frame underneath.

Assemble the 25 horizontal stabilizer frame.

Attach the main wing frame and tail frame to the fuselage.

26.27. Assemble the main leg box. 28.29. Cut out the left and right main wings and add a rounded habit. Please put a habit on a small R on the leading edge side. Add a small crease to one part of the trailing edge.

Glue the main leg box inside the main wing. Bond the main wing Norishiro in order from the outside. In that case, please pay attention to the leading edge line.

Attach the main wing to the fuselage main wing frame. Adjust the mounting angle etc. from the front.

30.31. Adhere the horizontal tail cover to the fuselage. Fold the front half of the notch into which the tail frame enters so that it protrudes to the outside and the rear half overhangs inward.

32.33. Assemble the horizontal stabilizer and bond it to the tail frame of the fuselage.

34. Assemble the missile pylon and cut the inner part. 34. Attach to the fuselage.

35. Assemble the fuselage pack. Adhere the fuselage pack to the fuselage. Both ends of the fuselage pack are pinched under the cutout of the missile pylon.
36.37. Cable duct Attach the left and right sides to the body. Mold the cable duct by pushing it against a thin round bar or the like.

39. Front leg, 40.41 Assemble left and right main legs. If you glued a thick paper between them, the strength will rise. Please paint the cut surface of the tire black.
42.43.44.45.46.47 Assemble the leg cover. Attach legs and leg covers to the airframe. Adjust the mounting angle etc. from the front.

48. Install the air refueling pipe, 50. Pitot tube.

51. Intake on the fuselage, 52. Install the arrester hook.

Assemble and install the missiles.

Assemble and install the tank.

That is it.
I suppose this is the building instruction for the Lightnings, but where did you find this instruction???? I downloaded both Lightnings but saw no written instructions at all I only have the parts downloaded !!
Reply With Quote
Login to remove ads
  #46  
Old 11-29-2017, 09:16 AM
Rubenandres77's Avatar
Rubenandres77 Rubenandres77 is online now
Member
 
Join Date: Aug 2010
Location: Bogota, Colombia
Posts: 2,070
Total Downloaded: 177.33 MB
Quote:
Originally Posted by JohnMGD View Post
I suppose this is the building instruction for the Lightnings, but where did you find this instruction???? I downloaded both Lightnings but saw no written instructions at all I only have the parts downloaded !!


For the instructions, just click on the very first link in the description of each kit, it leads to a new page with text and construction photos:



Attached Thumbnails
New Models from TSMC-instr.jpg  
__________________
Rubén Andrés Martínez A.
Seriously? I mean... seriously?
Reply With Quote
  #47  
Old 11-29-2017, 12:08 PM
JohnMGD's Avatar
JohnMGD JohnMGD is offline
Member
 
Join Date: Jul 2007
Location: Landgraaf, Netherlands
Posts: 433
Total Downloaded: 35.41 MB
Thanks Ruben,

I seems he now has included a photographic instruction, instead of the written text !

John.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:59 PM.


Powered by vBulletin®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Resources saved on this page: MySQL 9.52%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
Copyright © 2007-17, Paper Modelers.com