Leo Cherkashin - Proton - Page 2

**dhanners** · #11 12-02-2010, 10:56 PM

Fine job! Leo designed a great model, and you've done a great job of building it.

**peter taft** · #12 12-03-2010, 10:09 AM

One of my Favourites you have built here Sir.... and what a build

you have done her proud. Pat yourself on the back for a job VERY well done indeed

**vipers7** · #13 12-03-2010, 11:25 AM

Excellent built or to put it in other words: Hervoragend!!!

**mk310149** · #14 12-04-2010, 04:38 AM

Thank you very much for all your compliments!

Now the first part of the launch pad is completed, the leek platform ...
The building is wonderful, is not too difficult, although there are many moving parts.
The assembly took place in the order of the photos ... until the upper platform, then the adapter with the sliding parts, then the subfloor.
There is increased appropriately with cardboard, otherwise they will be somewhat unstable. However, care must be taken strongly on dimensions, because the function of the access doors and the support rods could be affected ...
Glue So after the assembly of the body, the board ...
And only to the extent of the false floor! This is also a good parallel for this part.
The upper deck is partially reinforced from below. (On the edge leave space for the tape, otherwise it will be too high and you see after the side of the cardstock ..
At last, the access doors to the holding of the rocket tubes (which are open to mobile and !!!), then the Proton can be used.

**peter taft** · #15 12-04-2010, 07:09 AM

Michael.... You gave us a treat showing us this superb build of the Proton - Now here's a treat for you, ENJOY

**Paper Kosmonaut** · #16 12-04-2010, 10:52 AM

My, that's quick! And a good result! Toll! Meine Komplimente!

**mk310149** · #17 12-04-2010, 01:59 PM

Thank you, the video is great!!!

die Adjusting Unit nimmt Gestalt an...
Auch hier ist viel Finnpappe zur Stabilisierung im Spiel..

the adjusting unit goes on...
also here I have take many cardboard for better stabilsation.
It's working fine!

**Jean** · #18 12-04-2010, 09:40 PM

Hello mk310149 !!!
Congratulations for the beautifull Proton !
It's the first time I see a proton launch pad.
Please can you say where I can find this paper kit ?
Cheers

**mk310149** · #19 12-05-2010, 03:18 AM

The links to Leo's downloads are in my first posting...

Here again:
Space flight paper modelling

**Jean** · #20 12-05-2010, 09:35 PM

Many thanks for the URL an all my gratitude to Leo for his beautiful designs.
Best regards from Reunion island
Jean