#161
|
|||
|
|||
Part 339a,b,c,d form the IMU Housing. Since they are part of the exterior skins I used aluminum tape on the surfaces and added rivet details.
Part count to date: 730 |
#162
|
|||
|
|||
Skin permanently attached to the forward section using double sided tape.
|
#163
|
|||
|
|||
This is looking brilliant Wichita. Thanks for also detailing the materials you have used, very use information. I would strongly "second" eagleclaw4935's idea of displaying the build construction pictures along with your model. Looking forward to the next installment!
Regards and take care Kevin
__________________
Normally the most advanced tech I use is a pencil. |
#164
|
|||
|
|||
Skin permanently attached to the mid section and aft section using double sided tape.
|
#165
|
|||
|
|||
Added the detail skin to the front hatch. Scratch built a small step in front of the front hatch, added ‘heels’ to the bottom edge of the front section, and attached the bezel on the front flood light.
|
Google Adsense |
#166
|
|||
|
|||
Very small detail added...small triangle shaped pieces at the top corners of the hatch overhang. Also a panel line and rivets above the flood light.
|
#167
|
||||
|
||||
Excellent work!
|
#168
|
|||
|
|||
It’s been both informative and a joy to watch you build this. Thanks for sharing.
Sergio |
#169
|
|||
|
|||
Dhanners and shalmaneser3...Thank you for your kind words.
Just a couple small details added...grab handle left of the hatch, and the small half-round things on the small step in front of the hatch. Does anyone know what those are or what was their function? I saw them on photos of the Apollo 11 LEM but don’t know what they are. |
#170
|
|||
|
|||
I think there were handles on both sides to facilitate opening the latch and the forward hatch. Not sure what the half-rings are for though.
|
Google Adsense |
|
|