PaperModelers.com

Go Back   PaperModelers.com > Card Models > Model Builds > PASA, Paper Aeronautical and Space Administration

Reply
 
Thread Tools Display Modes
  #1  
Old 12-12-2019, 08:22 AM
N96HBK's Avatar
N96HBK N96HBK is offline
Member
 
Join Date: Sep 2014
Posts: 2,272
Total Downloaded: 1.42 GB
Marscenter STS-1 Columbia

Hi folks,


Recently, I successfully recieved my dream kit- The Betexa Shuttle Atlantis!!!
I've never fully built the Marscenter kit before, which is virtually the same model as the Betexa kit. I wanted to practice, so a few months ago, I started to modify the template to resemble the early space shuttle specs.



Now, I think it is impossible for me to do a 100% accurate job on this kit, since it needs more editing than I can handle, so I am just going to make the model look more or less like the shuttle Columbia from 1981.


I started off by completely redrawing the cockpit windows. I traced some decals a few years ago, so I started there. Next was the crazy part- The tiles. Photos show the forward fuselage completely covered in tiles. I did a messy and inconsistent job, but I hope it will look okay to some.


I admit it, I rarely focus on one project, so this may take a while..... A lot of models tempt me now and then. But please do stay tuned for updates on this project...
Attached Thumbnails
Marscenter STS-1 Columbia-62fd55f4e2bfca6170519bfd623c5531_original.jpg  
__________________
Dong-Woo Kang
Reply With Quote
Google Adsense
  #2  
Old 12-12-2019, 01:24 PM
dhanners's Avatar
dhanners dhanners is offline
Member
 
Join Date: Jul 2007
Location: Manchester, UK
Posts: 2,599
Total Downloaded: 1.59 GB
The MARS Center Orbiter can be built into a great model, but it takes work. But that’s why we chose this hobby in the first place....
Reply With Quote
  #3  
Old 12-12-2019, 08:56 PM
dhanners's Avatar
dhanners dhanners is offline
Member
 
Join Date: Jul 2007
Location: Manchester, UK
Posts: 2,599
Total Downloaded: 1.59 GB
A few photos of my build from way back. I resized the model from 1/100th to 1/96th and scratchbuilt the ET and SRBs.

There are some errors in the MARS Center model. The biggest, as far as I was concerned, is that the HRSI tile pattern on the belly, wings and elevens goes in one direction. In reality, the tiles go in one direction up to the Orbiter centerline, then the other side is a mirror image. (In the acoustic guitar world, we would refer to it as "bookmatched.")

I dealt with that by printing two copies of the bottom, wings and elevons -- one normal and one reversed. Then I had to cut them and join them.

The streaking and discoloration on the belly was achieved with pastel chalks.

I also used textured paper to replicate the FRSI blankets, but if you're doing Columbia from '81, you don't have to worry about that.

Good luck!
Attached Thumbnails
Marscenter STS-1 Columbia-img_6433.jpg   Marscenter STS-1 Columbia-img_6434.jpg   Marscenter STS-1 Columbia-img_6435.jpg   Marscenter STS-1 Columbia-img_6133.jpg  

Last edited by dhanners; 12-12-2019 at 09:09 PM.
Reply With Quote
  #4  
Old 12-13-2019, 02:02 AM
N96HBK's Avatar
N96HBK N96HBK is offline
Member
 
Join Date: Sep 2014
Posts: 2,272
Total Downloaded: 1.42 GB
Ah yes, I've seen that amazing build!!! I think yours is the best build I've seen on the internet.

The belly tiles aren't mirrored on the Betexa kit, too... Which is a bit disappointing, but I still love it.


Today I did some more work, I added the tile pattern on the payload doors and the sides. A few more details, then I'm going to move on to the smaller parts.
__________________
Dong-Woo Kang
Reply With Quote
  #5  
Old 12-13-2019, 05:56 AM
N96HBK's Avatar
N96HBK N96HBK is offline
Member
 
Join Date: Sep 2014
Posts: 2,272
Total Downloaded: 1.42 GB
Oooops.... I deleted the previous images.. I forgot they were hosted
Anyway, here are some rearranged tiles on the wings.
__________________
Dong-Woo Kang
Reply With Quote
Google Adsense
  #6  
Old 12-17-2019, 12:09 AM
N96HBK's Avatar
N96HBK N96HBK is offline
Member
 
Join Date: Sep 2014
Posts: 2,272
Total Downloaded: 1.42 GB
So... I'm having trouble with the page with the umbilical plate, I need to delete every part except for the aft fuselage box in order to do anything... Inkscape goes crazy with big files!!
The problem is, I can't ungroup the page.. So I can't delete big chunks at a time. I'm going to try rasterizing the page and colour the plate gold...


Anyway, here are all of the pages I've worked on so far. Page 5 also has an issue, I couldn't lower some black tile patterns below the tile lines, because every single line was on a different layer....

https://1drv.ms/f/s!AhphP0Wy3OYZlFju7ALWsuCb2rc7
__________________
Dong-Woo Kang
Reply With Quote
  #7  
Old 12-17-2019, 02:45 AM
Algebraist Algebraist is offline
Member
 
Join Date: Dec 2017
Posts: 833
Total Downloaded: 143.14 MB
Enjoying following your build. Best of luck!

Kevin
__________________
Normally the most advanced tech I use is a pencil.
Reply With Quote
  #8  
Old 12-17-2019, 07:02 AM
Ponytail Ponytail is offline
Member
 
Join Date: Jul 2007
Posts: 698
Total Downloaded: 3.29 GB
Quote:
Originally Posted by N96HBK View Post
You removed the other linepattern too?
__________________
Greetings from Holland

Willem E.
(AKA Ponytail)
Reply With Quote
  #9  
Old 12-17-2019, 10:05 PM
N96HBK's Avatar
N96HBK N96HBK is offline
Member
 
Join Date: Sep 2014
Posts: 2,272
Total Downloaded: 1.42 GB
Quote:
Originally Posted by Ponytail View Post
You removed the other linepattern too?
I'm not quite sure what linepattern you are referring to...
----
Now, once I had a few test sheets printed out, I noticed a problem on the wings. I think after I imported the page in Inkscape, the lines on the belly became more dramatic... The picture doesn't do any good, but there is a massive difference, and the patterns will not match. I will have to find a way to match the parts properly.


I tested the first page, and I think the front windows may need some editing. Perhaps bringing them a tiny bit closer will work... What do you folks think?


Please excuse the large gap on the nose...
Attached Thumbnails
Marscenter STS-1 Columbia-20191218_130001.jpg   Marscenter STS-1 Columbia-20191218_125431.jpg   Marscenter STS-1 Columbia-20191218_125443.jpg   Marscenter STS-1 Columbia-space-shuttle_columbia_1981.jpg  
__________________
Dong-Woo Kang
Reply With Quote
  #10  
Old 12-18-2019, 07:16 AM
Vermin_King's Avatar
Vermin_King Vermin_King is offline
Member
 
Join Date: Jun 2011
Location: Kansas City
Posts: 11,571
Total Downloaded: 582.17 MB
It would be close enough for me, but I agree that it probably should be narrower
__________________
A fine is a tax when you do wrong.
A tax is a fine when you do well.
Reply With Quote
Google Adsense
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:28 AM.


Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
Copyright © 2007-2023, PaperModelers.com