#11
|
|||
|
|||
Hehe, ok I quit pondering and just took the plunge
Ok, now I know those LC parts were meant to be used without the colored parts, however I did use two of them, because the LC parts showed the lines only at one side. But without further words... the pictures (keep in mind this is only my first steam engine) : Well that's about it for today, I don't know if I'll be able to work on it tomorrow since I need some supplies while of course all shops are closed on sunday. Monday won't be much better either, because I will be in hospital (hopefully only for one day if nothing goes wrong).
__________________
On the Bench : USS Maine |
#12
|
|||
|
|||
Good start, looking forward to a clean build. Is the Duilio on permanent hold due to issues? Guess I will have to get that scratchbuild book out of storage after all :(
|
#13
|
|||
|
|||
Yeeesss, you hit the road! Well done so far. (Construction of steam engines doesn't differ from other kinds of paper models. :-)
|
#14
|
|||
|
|||
Very nice start, I will follow your progress.
Greetings Dieter |
#15
|
||||
|
||||
The prototype was a nice-looking locomotive, and you are off to a good start with the frame.
Don |
Google Adsense |
#16
|
|||
|
|||
Well, it took a while, but here's a little update.
What was on the programm today, was the suspension... well at least I was able to install half of it anyway Starting with the attachment things for the springs : As you may be able to see ; I have replaced the paper rolled things by alu tube. Then, I found out I had lost a piece of paper, containing a few parts, luckily they were simple parts that are easy to copy. And finally, I got to make and install the springs themselves :
__________________
On the Bench : USS Maine |
#17
|
|||
|
|||
Off from work yesterday, so, finally I had some time to work on this little machine ("machine" is the slang we use at work (I'm a train engineer) for "locomotive" (we never ever use that word)).
Ok, where did I log off ? Oh, ok, found it, let's move on... Next move is to place the second side of the suspension on. Next, came the attachements for the brakeworks : Placed (at least at one side to check) : Then came the wheels... now, according to the kit it was going to be fracking complicated, but I had ordered the LC parts, that also contained the parts for the wheels... And in a matter of a few hours, all six wheels were completed :
__________________
On the Bench : USS Maine |
#18
|
||||
|
||||
looking good Dany
__________________
David........... Paper modelling gives you a happy high. currently building. c GAZ 51 ALG 17, wagon 111a. unex DH411 excavator and spitfire Mk 9 |
#19
|
||||
|
||||
I do believe laser cut parts are worth the money. looking very good
__________________
A fine is a tax when you do wrong. A tax is a fine when you do well. |
#20
|
|||
|
|||
Hello again.
After a while of inactivity, I worked a bit on this machine yesterday. The progress isn't that spectacular, but at least it kept me away from the pub Ok, a locomotive needs to be able to brake and in order for the brakes to work it needs a brakecilinder : And together : Then there were nuts... So, that's it for today, at the moment it's drying from a layer of primer. Soon to be continued
__________________
On the Bench : USS Maine |
Google Adsense |
Thread Tools | |
Display Modes | |
|
|