#11
|
|||
|
|||
The frame and springs are looking very good Kurt. The drive wheels should be interesting, especially with the running gear.
__________________
This is a great hobby for the retiree - interesting, time-consuming, rewarding - and about as inexpensive a hobby as you can find. Shamelessly stolen from a post by rockpaperscissor |
#12
|
||||
|
||||
Hello
New year, new luck tinkering ............. Three rings per wheel, where I cut inside with the cutter and out with scissors, glue together. With the rims rings color comes into the game, but there are lot of detailed work Kurt |
#13
|
||||
|
||||
Steamloco wheels in 1:45 is always a huge challenge. That's why I use laser cut sets. I made "analog" wheels in 2 models only.
__________________
Greetings from Czech Republic --------------------------- Proud owner of: http://kartonowakolej.pl Proud member of: Bielska Strefa Modelarska |
#14
|
||||
|
||||
The challenge is the whole point.
Glad to see someone actually cutting things out.
__________________
SUPPORT ME PLEASE: PaperModelShop Or, my models at ecardmodels: Dave'sCardCreations |
#15
|
||||
|
||||
Hello ,
@ Marcin : lacer cut is good , but I donīt like so much painting , my favorit is pure papermodels , but sometimes I also use laser cutīs . @ airdave : YESSSSSS thatīs it now letīs go on ........ The rings connect, and the hubs assembling. The wheel stencil I have to prevent with cling film coated to sticking of the spokes. After fixing of the rim ring we go with the spokes. With thin red stripes, the spokes are covered, thus results in the intermediate result. Kind regards Kurt |
Google Adsense |
#16
|
||||
|
||||
Well, so far so good. You're lucky that "Jupiter" has only 4 wheels with spokes. Think about OKz 32 (DR 95 class)
__________________
Greetings from Czech Republic --------------------------- Proud owner of: http://kartonowakolej.pl Proud member of: Bielska Strefa Modelarska |
#17
|
||||
|
||||
Hi Marcin ,
thatīright , when there are so much weehls itībetter to use the laser cut letīgo on ............ The treads 19c are a little too short. At the wheel aperture circle cutting is called for, with the star aperture the hub is covered. With wheel flange and spacer washers behind the front and the drive wheels are almost ready. After the wheel flanges stain with Aquacolor silver must this dry before the first fitting is done. kind regards Kurt |
#18
|
|||
|
|||
Impressive work, Kurt!
__________________
Fred Bultman |
#19
|
||||
|
||||
Thank you Fred
little progress ............... The two axes of the drive wheels, the controller whose linkage are pushed onto the axle, but do not stick !! Plan means pay close attention to the orientation! The whole set into the frame and connect with the sliders. nice greetings Kurt |
#20
|
||||
|
||||
Frame finale ........
The small counter bearing is cultivated on both sides, and I the edge dyeing only after assembly at the Mini parts. The next small parts are loosely placed on the axis around this easily with the controller to glue .It follows the center spring package. Kind regards Kurt |
Google Adsense |
Tags |
locomotive, bow, sheets, modelik, jupiter, central, drawings, pacific, wait, parts, distribute, good, piece, condition, kurt, museum, usual, fresh, factory, build, printing, year, manageable, usa, complex |
|
|