#21
|
||||
|
||||
Hello !
Eight times part 62c ... glued on. The parts 63a I reinforce half with 0.9 mm and 1.5 mm, so I reach exactly the width of the border. On the covers 63b ... Attention ! Do not glue the axles with tabs, but roll the diameter to match. Best regards Kurt |
#22
|
||||
|
||||
Hello everybody ,
The small parts are first put aside. The inner roof is cut out ... glued and weighted between two glass plates. Treads and windows cut out ... I transfer the window openings on book binder film. At the end of the process, I need these cutouts to cover the glass surfaces when painting the model. Best regards Kurt |
#23
|
|||
|
|||
A lot of very nice workmanship here
|
#24
|
||||
|
||||
Hello ,
after a week's break we are back here ... Now I transfer the windows to the inside ... cut them out with a slightly larger area, divide because of the better handling the inner part and glue on congruent. Now glue the window foil into the frame ... and close it at the back. In the area of the driver's cab I use the yellow reserve, otherwise black, because I do not need to dye any edges. Best regards Kurt |
#25
|
||||
|
||||
Sorry ,
I forget the pictures ....... |
Google Adsense |
#26
|
||||
|
||||
I have been following your build of this beautiful traction locomotive from the beginning, Kurt, and I am, as always, impressed with your skill. The work on the undercarriage wheels and parts is first rate. The body work appears to be coming along well, too.
Don |
#27
|
||||
|
||||
Hello Don ,
thank you for the good words Good day to all others , Glue on the trim strip ... also glue the lower thin strip step by step. The fittings for the handrails are pierced ... color edges and glue on the designated places. Best regards Kurt |
#28
|
||||
|
||||
Hello
Before the side trim is grown, I assemble the underbody. Since the whole weight of the locomotive rests on the repositories, I reinforce the parts with 3 x 1.5 mm Finn cardboard, so that there is no cavity. The re-deposits are now glued to the underbody panel. Best regards Kurt |
#29
|
||||
|
||||
Hello everybody
In the meantime, the filigree window frames are cut out ... and glued on. Now glue the bottom plate ... and place the side pieces. Best regards Kurt |
#30
|
|||
|
|||
Wow, I’ve been following along and it’s really coming together very nicely. Keep up the great work!!
|
Google Adsense |
|
|