#41
|
||||
|
||||
I hate to sound like a broken record....but WOW!
|
#42
|
||||
|
||||
This is such a great build. Very clean and neat. Great job.
__________________
Greg |
#43
|
|||
|
|||
Very interesting build. Great job so far. Lots of detail. I’ll be following along.
|
#44
|
||||
|
||||
Hello ,
after a break of two weeks I am back at my locomotive ................ Now the parts for the suspension of the bogie. Do not forget to insert the bracket during installation, because afterwards it will not work anymore! Actually, two models in themselves, but still not ready. Best regards Kurt |
#45
|
||||
|
||||
Hello everybody
Continue with the eight sand containers ... It should be noted that the white circles are printed in the wrong place. With the two connecting rods the chapter bogies is now finished. Before attaching the lower front panel a lot of cardboard had to be sanded ... initially 3mm too short, but now fits exactly. Best regards Kurt |
Google Adsense |
#46
|
||||
|
||||
Hello everybody ,
Now glue the trim strip from the side over the front. The window frames are prepared. Now glue on the inner frame and glue in the glass parts with Micro Cristal Clear. The glass is fixed with thin strips. At the front two frames are used. Now glue the window section in two steps. With kind regards Kurt |
#47
|
||||
|
||||
Hello everybody ,
Reinforce and glue the parts for the bumper. Place under the cab, fits very well Best regards Kurt |
#48
|
||||
|
||||
Been following.
This is a great build, and you have been very steady in your progress.
__________________
The SD40 is 55 now! |
#50
|
||||
|
||||
Hello
After our cycling holiday in Calabria we continue here again ... The parts for the clearance rake are doubled with black cardboard. First, glue the thin strips ... ... fix the rake with cardboard strips ... so that it stabilizes. Best regards Kurt |
Google Adsense |
|
|