#61
|
||||
|
||||
Thank you Elliott
now lets go on … It continues on the roof with the insulators for the current collector and some wire parts ... which are all glued together. The parts for the pantographs ... here again some part numbers are wrong, but everything is to be overlooked. Best regards Kurt |
#62
|
||||
|
||||
and on you go,
The lower frame, first fitting. With the help of the sketch in 1: 1, the angles of the current collectors are set up. Now assemble the contact rail. Now it gets tricky! Best regards Kurt |
#63
|
||||
|
||||
Hello !
The upper end forms the contact rails. Try on the roof, looks for electric locomotive The roof is now completed with the ventilation grille and the signal horns. Best regards Kurt |
#64
|
||||
|
||||
Hahaha Kurt, You're so fast. I think You have too much free time
__________________
Greetings from Czech Republic --------------------------- Proud owner of: http://kartonowakolej.pl Proud member of: Bielska Strefa Modelarska |
#65
|
||||
|
||||
Hello Marcin ,
oh no I dont have so much time , I Always take one hour and one hour , day by day. Kind regards from Austria . Hello , there is again a small construction progress ............. It continues on the underbody ... where again some parts are to be processed. These parts can only be mounted after fixing the bogies. Now glue the bogies ... ... to achieve parallel alignment of the bogies, I put the track on the wheels during the drying process. Best regards Kurt |
Google Adsense |
#66
|
|||
|
|||
Clever - putting the track atop the bogies while they dry! Simplest solutions are often the best.
__________________
This is a great hobby for the retiree - interesting, time-consuming, rewarding - and about as inexpensive a hobby as you can find. Shamelessly stolen from a post by rockpaperscissor |
#67
|
||||
|
||||
Those bogies look like you could apply power and they'd go!
|
#68
|
||||
|
||||
Hello ,
thanks to all kind answers And on it goes ... Now the clips can be glued to the housing ... then place the linkage between the bogies. Now insert the finished segments and the battery boxes ... ... and finally the two pressure vessels. Best regards Kurt |
#69
|
||||
|
||||
Hello !
It continues with bumper and buffer ... 1 mm rivets are glued. Mounting the buffers ... Now the brake lines for the trailer. Best regards Kurt |
#70
|
||||
|
||||
Hello ,
it continues in mini format ... The clutch ... is again a small model with 25 individual parts. The whole segment is now glued in front and behind. Best regards Kurt |
Google Adsense |
|
|