#11
|
||||
|
||||
Hello !
Thank you Kevin The starboard sideboard I glue first in front of the center, then step by step to the bow. Now I pull the upper part back, then the lower part. Finally, glue the rear. Bow and stern require a bit of sensitivity when processing. regards Kurt |
#12
|
||||
|
||||
Nice build. Another HMV kit underway. Looking forward to more. Have the SMS Emden ordered.
Rick |
#13
|
||||
|
||||
Hi Rick ,
I also like the HMV kits Parts 28 - the wheelhouse ... ... glued on the boat deck. The two parts of the bridges railing preliminaries, glue together and place. Prepare and glue the rear bridges. Kind regards Kurt |
#14
|
||||
|
||||
It looks very good. Thanks for the step-by-step images and narrative.
Don |
#15
|
||||
|
||||
Hi Don ,
thank you , oh it is a pleasuer to Show the step by step parts . Hello everybody Parts 31 + 32, container for the lifejackets ... to the boat deck. Place the skylight in between. Parts 33, the chimney ... ... a filigree part ... ... mounted on the skylight. Now the fan is built, mini model building! All fans mounted on deck. Best regards Kurt |
Google Adsense |
#16
|
||||
|
||||
Hello !
it goes on ... Compass and steering wheel ... ... are installed in front of the wheelhouse. Parts 41, the anchor winch ... .. placed on the back. In the meantime, the shrouds are prepared, which are impregnated with glue. Fine work on the boats Davits ... ... which should dry well. Best regards Kurt |
#17
|
||||
|
||||
Hello !
Parts 44 + 45, the four dinghies ... ... a little finger exercise. The two masts are reinforced with 0.4 mm floral wire, glued to the deck. Now the four dinghies to your place. Kind regards Kurt |
#18
|
||||
|
||||
Hello ,
it's in the final ... Now the slats are glued step by step. Place the two anchors ... ... on the bow. When tightening the rigging I turn back my "bobbin method". Now the flags have been installed and the Jan Molsen can already use the ferry service Hamburg harbor. After 17 days of construction with 23 hours of construction I am ready. A beautiful skipper, without problems build, I would say the model for the entrance into the 1: 250 shipbuilding. Best regards Kurt |
Thread Tools | |
Display Modes | |
|
|