PaperModelers.com

Go Back   PaperModelers.com > Card Models > Model Builds > Ships and watercraft

Reply
 
Thread Tools Display Modes
  #1  
Old 10-15-2017, 02:34 PM
Seahorse's Avatar
Seahorse Seahorse is offline
Member
 
Join Date: Apr 2016
Location: Nisko
Posts: 315
Total Downloaded: 0
"De Zeven Provincien" 1665 [1:100]

Hello,

it is really difficult to write something original about such a famous ship. So maybe the short story, how I started it, is more interesting.

Long, long time ago (about one year ago) I asked Ab ("abhovi") about his opinion on some drawings of Polish old sailship. He confirmed my doubts about those plans and suggested, that there could be some more interesting ships I could build, for example "De Zeven Provincien" So I started working on this model. I received drawing and Ab was patiently helping me, answering questions, explaining details... and now you can see the very first effects of our "co-operation".

I built the frame structure only to the "verdek", and then I will add higher "levels" of the "halfdek" and the "bakdek". Gunports will be open only on the left side, and that is why I painted dark brown only there. At the very begining I had to attach "kardeelblok", as it is tide two decks lower, and it couldn't be possible to do it later. Now this block will wait 1,5-2 years:-)))))

I'm convinced that every single word about the ship and drawings written by Ab will be more fascinating, than my broken English. So now the first pictures:

Best
Tomek
Attached Thumbnails
"De Zeven Provincien" 1665 [1:100]-szkielet-04.jpg   "De Zeven Provincien" 1665 [1:100]-szkielet-05.jpg   "De Zeven Provincien" 1665 [1:100]-szkielet-06.jpg   "De Zeven Provincien" 1665 [1:100]-szkielet-07.jpg   "De Zeven Provincien" 1665 [1:100]-szkielet-08.jpg  

"De Zeven Provincien" 1665 [1:100]-szkielet-09.jpg   "De Zeven Provincien" 1665 [1:100]-tuck-02.jpg   "De Zeven Provincien" 1665 [1:100]-grote-kardeelblok.jpg   "De Zeven Provincien" 1665 [1:100]-grote-kardeelblok-02.jpg   "De Zeven Provincien" 1665 [1:100]-7p-i-golab.jpg  

Reply With Quote
Google Adsense
  #2  
Old 10-15-2017, 03:25 PM
oklacnw oklacnw is offline
Member
 
Join Date: Aug 2007
Posts: 13
Total Downloaded: 598.3 KB
Why gun ports on port side only? Is that the way the real ship was built
Reply With Quote
  #3  
Old 10-15-2017, 03:45 PM
Michael Mash's Avatar
Michael Mash Michael Mash is offline
POTM Moderator
 
Join Date: Oct 2008
Location: The Great Lakes
Posts: 5,411
Total Downloaded: 18.36 MB
Hello Tomek,
Nice beginning to your Zeven Provincien.
That final photo shows a significant difference in size when compared to your other project. But I see they are both 1:100 scale.
Mike
Reply With Quote
  #4  
Old 10-16-2017, 01:07 AM
JohnMGD's Avatar
JohnMGD JohnMGD is offline
Member
 
Join Date: Jul 2007
Location: Echt, Netherlands
Posts: 801
Total Downloaded: 80.02 MB
Quote:
Originally Posted by oklacnw View Post
Why gun ports on port side only? Is that the way the real ship was built
Of course not, gun ports were on both sides, Tomek only make them closed on one side, just read his post correctly !!
Reply With Quote
  #5  
Old 10-27-2017, 11:56 AM
Seahorse's Avatar
Seahorse Seahorse is offline
Member
 
Join Date: Apr 2016
Location: Nisko
Posts: 315
Total Downloaded: 0
Hi all,

step by step I am working on this model, but it is much bigger than I expected:-) I made "Wasa" about 15 years ago and I forgot how big such a model can be.
First of all I'd like to thank Ab for a short but very accurate description of "De Zeven Provincien", her reconstruction and drawings on which I am working. I don't see the point to divide or cut the text I have received, so here it is:

"...De 7 Provinciën was built in 1665 in Rotterdam as the new flagship for the famous Dutch admiral Michiel de Ruyter (1607-1767), who sailed it from 1666-1674. Its measurements were 163 x 43 x 16.5 Amsterdam feet (46.13 x 12.17 x 4.67 m), it carried 80 guns, its displacement was 1600 tons and there was a crew of 420 men aboard.

The name was chosen because of the seven counties that fought the 80-years war of liberation against the Spanish from 1568 to 1648. The united country had also freed itself from the Catholic Church and nobility and the name is a tribute to an organisation, which proved its right of existence without a ruling king between 1649 and 1672. In that year stadtholder Willem III, Prince of Orange, the later king of England William III (1650-1702), returned to Holland.
The ship fought in the second (1665-1667) and third (1672-1674) Anglo-Dutch Wars and took part in the Four-Days Battle (1666), The Two-Days Battle (1666), the Chatham Raid (1667), the Battle of Solebay (1672), the Battle of Schooneveld (1673) and the Battle of the Texel(1673). In 1674 the ship even visited the West-Indies. In 1692 she fought in the Battle of Barfleur and was broken up in 1694.

The lines of the model were reconstructed by Ab Hoving, Herbert Tomesen and drawn by Cor Emke in 2006. They were based on both contemporary Dutch shipbuilding literature and specification contracts of comparable ships of those days. Also earlier publications by G.C Dik and O. Blom were used in the new design. It was intended to rebuild the ship that was put on the stocks of the Bataviawerf in Lelystad, Holland, in 1996 which project appeared to fail in the beginning of this century. Though great progress was made in the first three years the revived project was stopped because of a lack of money..."

The process of the model building is now at the most boring stage:
1. I spent some hours with a sandpaper to prepare frames for the first layer.
2. I sticked the first layer (which is so trivial, that I did not remember to take pictures:-).
3. Again "sandpaper job" to begin the second layer. This one is about 0,7 mm thick. In the future I'll glue the final layer, which will be 1 mm thick.

I added 7 planks on both sides, got tired and can't see any progress:-))

Best
Tomek
Attached Thumbnails
"De Zeven Provincien" 1665 [1:100]-poprzeczne-lewa.jpg   "De Zeven Provincien" 1665 [1:100]-1-7-podposz-09.jpg   "De Zeven Provincien" 1665 [1:100]-1-7-podposz-01.jpg   "De Zeven Provincien" 1665 [1:100]-1-7-podposz-04.jpg   "De Zeven Provincien" 1665 [1:100]-1-7-podposz-02.jpg  

"De Zeven Provincien" 1665 [1:100]-1-7-podposz-06.jpg   "De Zeven Provincien" 1665 [1:100]-1-7-podposz-07.jpg   "De Zeven Provincien" 1665 [1:100]-1-7-podposz-08.jpg  
Reply With Quote
Google Adsense
  #6  
Old 10-28-2017, 06:35 AM
eatcrow2's Avatar
eatcrow2 eatcrow2 is offline
Member
 
Join Date: Jul 2007
Location: Santa Monica, CA
Posts: 2,590
Total Downloaded: 2.23 GB
Wonderful write-up with photos of your progress!!
Reply With Quote
  #7  
Old 10-29-2017, 01:18 AM
Holzwurm Holzwurm is offline
Member
 
Join Date: Jun 2012
Posts: 51
Total Downloaded: 2.09 MB
Very accurate build. I am surprised that you don't have any stressed skin.
__________________
Best regards
Christian

in the shipyard: Papegojan, 1/72 of Model Shipyard
Reply With Quote
  #8  
Old 10-29-2017, 05:52 AM
Erik Zwaan's Avatar
Erik Zwaan Erik Zwaan is offline
Member
 
Join Date: Sep 2012
Location: Leiden area, The Netherlands
Posts: 2,875
Total Downloaded: 37.67 MB
Very interesting build. I have seen the replica in progress at the Batavia wharf in Lelystad a few years ago and it's a pity they have run out of funds to continue. This is by far the most famous ship in Dutch history and therefore would deserve a better fate. The original had been in service for 30 years, that must have been a long time, given the primitive maintenance and preservation methods of those days, I suppose.

Erik
Reply With Quote
  #9  
Old 11-25-2017, 10:57 AM
Seahorse's Avatar
Seahorse Seahorse is offline
Member
 
Join Date: Apr 2016
Location: Nisko
Posts: 315
Total Downloaded: 0
Hi,

thank you men for your interest and comments.

The ship is being built.
1. I went on with "fals planks" upwards to the deck:


2. I had to add new part at the stern. I used my wife's beloved curtains to make these windows:


3. I put "wooden" verdek and added some beams:


4. Step by step I glued internal bulwark (it consists of 3 long parts):


5. Then the front wall:


5. I started to make gunport frames:


Now she looks like this:




Best
Tomek
Reply With Quote
  #10  
Old 11-25-2017, 04:07 PM
elliott elliott is offline
Eternal Member
 
Join Date: Oct 2007
Posts: 8,416
Total Downloaded: 6.51 GB
You have made good progress here Tomek! As always a neat, superclean build. Looking forward to seeing more.
__________________
This is a great hobby for the retiree - interesting, time-consuming, rewarding - and about as inexpensive a hobby as you can find.
Shamelessly stolen from a post by rockpaperscissor
Reply With Quote
Google Adsense
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:30 PM.


Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
Copyright © 2007-2023, PaperModelers.com