#21
|
||||
|
||||
Hello !
@ Radek : maybe the pleasure comes with you, if you watch me a bit ..... @ Kevin : Yes, I stay tuned, but not too fast Now I have freed the hull from the glass plate ... now with little blue tabs ... ... gluing the side wall ... and coloring edges Best regards Kurt |
#22
|
||||
|
||||
and on it goes ...
First, I just glue in the back and bottom of the corner ... then forward, but only below. Now glue step by step ... from back to front to the middle. Best regards Kurt |
#23
|
||||
|
||||
Hello !
In the front part of the side wall, the flap 29d is used, as well as the anchor pockets. The flap 29d with a kink at the top, glue ... ... and cut off the protruding part. Best regards Kurt |
#24
|
||||
|
||||
Hello everybody
With the gluing of the side wall I start in the center of the hull ... and glue tab for tab ... ... to the very front The bug did not work well for me Best regards Kurt |
#25
|
||||
|
||||
That's going good.
The difficult parts are almost done!
__________________
The SD40 is 55 now! |
Google Adsense |
#26
|
||||
|
||||
Hi Kevin ,
yes the difficult parts are done , but not so good as good I can do it sometimes and now we go on … Double the next parts ... and glue Place the two anchors ... in the anchor pockets Best regards Kurt |
#27
|
||||
|
||||
Hello !
Part 33 - the doors are glued separately ... The deck construction walls ... ... place ... deck props 34 ... ... glue on the ship's side - The first bollards are made. Best regards Kurt |
#28
|
||||
|
||||
Hello everybody
Bollards placed ... First glue the top and bottom of deck 35 together ... ... and after drying cut out the inner surfaces ... during the dry phase weight with weights. So the deck is sitting up, Best regards Kurt |
#29
|
||||
|
||||
Hello !
Place pieces 36 + 37 ... on deck 35 Part 38 ... gluing step by step Best regards Kurt |
#30
|
||||
|
||||
Good progress - you are going quickly.
__________________
The SD40 is 55 now! |
Google Adsense |
|
|