Koga elblaska z 1350 roku - Maly modelarz

[Bones]

Hi all... i just started this beauty. Its my first paper ship... does anyone have more pictures or some instructions for it... i know a bit of polish... but its still a challange without the pictures... thx ahead. :D

[Rubenandres77]

There is a building thread at Konradus with photos of the process:
WWW.KONRADUS.COM - FORUM MODELARZY KARTONOWYCH - [R/G] Koga Elbl±ska z 1350 r. - MM 9/2000, 1:100
Maybe that can help you as reference.

[Seahorse]

Here are another threads with this model converted into 1:75 and built of wood: Forum Koga • Zobacz temat - Koga elbląska - Koga Portal - Modele - Żaglowce - Statki - Okręty - Forum modelarskie (not finished) and Forum Koga • Zobacz temat - Koga Elbląska 1:75 - Koga Portal - Modele - Żaglowce - Statki - Okręty - Forum modelarskie (very detailed full log)

I made her many years ago and remember, that hull planks are very difficult to match. I had to cut planks into shorter parts to adjust them. Think about filling the hull with some stuff and finishing it with some modeling putty. If not, don't expect to make the hull nice and rounded.

Best
Tomek

[Bones]

wow thank you lads! thas so cool! im planing to refit this one to a croatian type ship from the 11th century... they are so similar.... those links are great help!!!! :D

[RdK]

Hi there!

I've made her some 9 years ago from balsa wood according to the Maly Modelarz plans.

Here's the link.

Have fun building your verison! I will follow!

Rgds,
Radek

[Bones]

A few pictures :D

[Dane]

Are you sure that deck's planks should go transverse?

[Bones]

hmmmm deck planks?

[BalticSwimmer]

If you need help translating any of the instructions, I would be happy to help.

[Bones]

Originally Posted by BalticSwimmer

If you need help translating any of the instructions, I would be happy to help.

thx very much! im new at polish... i try to translate but.... this is my text... its not good... but its a start... :D



kostur trupa. stavljamo elemente na karton i pažljivo ih izrežemo. zatim sastavljamo i lijepimo, pazeći da je aksijalna simetrija preživjela.1-4. palube. dijelove 1 i 2, ljepilo 0,4 mm, izrezati i zalijepiti na kostur na pravim mjestima. Elementi 3 i 4 zalijepljeni su na označenim mjestima na dijelu 1
5-6. dobivanje kadfube. ovaj dio modela može manje iskusnim modelarima dati najviše problema zbog neuobičajene tehnike njegove primjene. oprezno i pažljivo izvršenje će u velikoj mjeri utjecati na konačni izgled modela. parts marked with the letter L are the sheathing of the starboard side, p the right plating. The first three planks of the plating, ie 5-7, are laid on the so-called. contact, subsequent to the so-called bookmark. for symmetry it is advisable to arrange both the right and left sides at the same time. laying each stave always starts from the stern, trying on it first dry, according to the course marked on the gates. when arranging the cover, it is also necessary to pay attention so that imitation nails are arranged in one line. once more we check if the stave is in the right way, and then stick it one by one to each turn. each stave cladding is additionally glued to the previous one. the last two staves 15 and 16 are only glued to the previously removed one, because they form one side of the side. Shema 2!
17-19 steppe with stews. elements a stick to the cardboard, after gluing, glue the parts b. all after gluing, glue together, then fasten to the skeleton and glue the edges with the elements c.
p1 and p3 stand. We stick the parts on the cardboard, after gluing, stick together in pairs and fold them all together.
20 and 24 protruding part of the wreg. after cutting and molding, stick with tweezers in marked places on the deck and sides.
25. a strip strengthening the bulwark. Cut and glue the parts in marked places on protruding elements of the wreg.
26-36 stern castle. decks 16 a and b stick to the card. parts 27a, b stick together and cover part number 26a. elements 28-30 glued in pairs, in the marked places, glue the parts c, d, e, f, and stick to the post 26b. then we assemble the castle in a complete gluing together with each deck. 31.33 parts, glued to the rectangular ones and glued to element 26a. we attach the castle in this way to deck number 2. We enclose the castle with the help of parts 35 and 36.
37-42 bow castle. boards 37a and b glue behind the seoba, then we attach the previously prepared blanks 38-40. We cover all parts, part 41. We attach element 42 to the bottom deck and fasten the castle in the marked place on the stern. Put the 42a on a cardboard box, glue it with 42b and attach it to the castle and stew.
Place the element 43 in a rectangular shape and paste it in the holes in the bulwark – BEDEM!
44-47 STEERING EQUIPMENT. 4 pins will be needed to make it. part No. 441 is glued onto the carton, after combing we connect with 44b. 45 and 46 we will wrap around the pins and stick in the marked place on the rudder blade. We stick the fitting to the fin. all the way to the stern stern.

28-50 ladders. elements 49 and 50 are glued in pairs, parts 48 are rolled up and glued to parts 49 and
50. a longer ladder is fastened to the bow castle, shorter to the hatch in the aft castle, according to drawing no. 6.

51-53 Anchor. we glue according to drawing No. 4.

54-56 junction. part 54 55 after forming, stick together so as to form the base of the kotkownica. in section 56, we create holes, glue them and place them in the base. in the holes we paste the porch cavalry. template s1.

57-58 capstan. Cut the parts 57a, make holes in the marked places and wrap around 57b. part 57c and d mold in a cylinder and glue to parts 57a. elements 58 glue on the bristle, glue in pairs. in the holes, paste the sixty-sixth holes into the holes in section 57, and paste the curettes of the tincture, painted black. template s2. Put the kabastan under the stern castle.

59 and 60 goats. 50 parts are formed, we attach the bar 60 and mount to deck number 2.

61 and 61 imitation of protruding beams of frame sets. we glue and glue in marked places to the plating.

63 -65 mast, reja. part no. 63 stick to the cone, which can be strengthened from the middle with a long paddle or a rounded slat. on the koniczach attach the elements 63a and b. mast paste into the cadaver skeleton with the help of part number 64, which we stick on the cardboard. We do the dikes like masts. Fig. 6

66 busk shot. element 66 we roll up, paste into the middle of the sculptor, attach the parts a and b. the bowsprit is assembled to the bow stern by means of parts 67 and 68. fig 6

69 and 70. we glue it to the rei and mount it to the mast with the help of parts 70, not to stick the rei to the mast.

71 and 72 beting. we glue and assemble to part number 64.

73-75 cross. We roll up parts 74 and 75 in a roll and glue together to create a four-armed cross. part

73 we roll up on the pin, fig. 7, to create balls. We glue the cross to the ball and fix it on the mast. 73 parts can be replaced with a large head pin, and the cross can be made from cutlery.

76 and 77 lava ladder. part 76 and glued onto a cardboard box, glue together with the part 76b and glue the part 76c. we install the brackets 77 to the sides according to drawing no. 6.

78 and 79 flags. elements are glued in pairs. 78 pieces are glued to the flagpipes made of wire, template s3, and glued to the deck of the stern castle. we attach the second flag to the part made according to s4 and fix it on top of the mast. Fig. 6

80-82 anchors. elementa 80a is glued onto a cardboard box, glued together with 80 b. gluing parts 81, we make holes in the marked holes in which we insert a circle made of wire according to the template s3. No. No. 82, glued and glued to the anchor shaft. we get a black 0.6 mm thread to the cat. anchors are mounted in the fore section of the model. Fig. 6. and thread guide the anchor bolts.

83 and 84 barrels. parts 83, 83a and b are glued together so that they formed 2 great cones. then glue the stools and wrap them with the parts 84.
85 and 86 blocks, decanters, rigging. We glue on the cardboard, glue in pairs and fasten using the rigging according to drawing No. 6.



_____________________________

and i made a page with a cargo for the ship