#11
|
||||
|
||||
Hello friend off Deep water Explorer
thank you all for Posts now letīs go on Incidentally, the submarine stand is being built. Reinforce the base plate with 3 mm, the side parts with 0.9 mm Finn cardboard Fuselage parts 1 to 4 are assembled, the fit is perfect Yours sincerely Kurt |
#12
|
|||
|
|||
I have been looking forward to a build of this for ages. Thank you. Looks like a great model.
|
#13
|
||||
|
||||
Welcome Davej
The reinforced side panels are covered with paper strips at the edges ... and glued together to form a stand Of course, I can also use this as a mounting device Yours sincerely Kurt |
#14
|
||||
|
||||
Good progress Kurt - very quick.
__________________
The SD40 is 55 now! |
#15
|
||||
|
||||
Excellent work so far!
In looking at photos of the real thing, I notice there are some ripples or bumpiness on the outer skin; paper would be a perfect medium for replicating that. (Except the uninformed might think it was bad modeling....) |
Google Adsense |
#16
|
||||
|
||||
Hello Kurt,
Nice display for your Trieste. Mike |
#17
|
||||
|
||||
Hi Kevin , welcome again
Hello dhanners , thank you for the Pictures , now I can make mistakes Hi Michael , jes the Display Looks good , perhaps I Change the Color , I am Looking Forward and now letīs go on Before fixing frame W2, the frames W3 / W4 are prepared ... and adapted on a trial basis To achieve a perfect finish of the frame with the leading edge, I glue on the inside with light pressure ... I have to be careful that they do not stick tabs in front Yours sincerely Kurt |
#18
|
||||
|
||||
Quick progress!
__________________
The SD40 is 55 now! |
#19
|
||||
|
||||
Now glue the frames W3 to W8 ... according to the plan With the parts 5 to 8 for the cladding, it is now very exciting Yours sincerely Kurt |
#20
|
||||
|
||||
First glue part 6 down ... then pull up the sides Glue Part 7 only at the middle frame first - let it dry well ... then fix the side parts again Yours sincerely Kurt |
Google Adsense |
|
|