#11
|
||||
|
||||
Fourteen transverse ribs ... glued and allowed to dry well again ... ... the side frames No. 16 follow ... everything fits very precisely Sincerely Kurt |
#12
|
||||
|
||||
Piece 17...fit the four pockets... ... and glue it onto the frame ... and the first fitting of the underwater " torpedoes " fits ! Sincerely Kurt |
#13
|
||||
|
||||
Four tabs 17, a b c d e... Glued on the inside... ... and 17 f g h i ... placed outside Sincerely Kurt |
#14
|
||||
|
||||
Part 18, the underside of the fuselage ... I start with the fixation at the bow ... ... then pull backwards at the bottom ... and glue upwards at the rear with a 0.4 mm overhang ... ... now close the sides ... and finally glue the rear With kind regards Kurt |
#15
|
||||
|
||||
The first board wall ... glue inside with small tabs ... ... the result ... I start on the outside with gluing the side wall ... ... and pull this inside from the front to the back, the second side wall is already ready Sincerely Kurt |
Google Adsense |
#16
|
||||
|
||||
Hi
The anchor device , first glue the inside ... fold up ... ... and apply to the bow ... a very filigree part! Sincerely Kurt |
#17
|
|||
|
|||
Great going, and good pics of the build too. I heard the HMV kits fit together very well, but I'm quite sure you make it look easy too!
|
#18
|
||||
|
||||
Hello Positive Rate ,
yes the HMV kits fit toghether very well , and itīs so funny to built them little progress... Part 23 is placed back on the glass slipway ... glued to the frames and the first body wall is mounted The pieces for the next deck...processed Sincerely Kurt |
#19
|
|||
|
|||
Always a pleasure to see your work!
Greg |
#20
|
||||
|
||||
Hi Greg , Thank you
The deck is in place ... the supports 25 are attached under the overhangs Continue with the construction wall 26 and various attachments ... which are all placed Sincerely Kurt |
Google Adsense |
|
|