#1
|
||||
|
||||
Need WWII German Gas Cans
Dear List folks:
Some time last summer I saw Gas cans in severial scales said is'nt that nice and went on. NOW I have started a diaroma With a 1/35 scale Kubualwagen and I just had a friend use his new 11x17 color copier to blow up the 1/50 scale AEC Dorchester 168% to match the Car. Looking at pictures of the dorchesters in North Aferica most of them have racks of gas cans on top. I hope someone has the adress of paper gas cans. Also I'm tring the layering Idea so far so good. Thanks Miles Linnabery, Youngstown, NY |
Google Adsense |
#2
|
||||
|
||||
Try looking here Zealot Hobby Forum
|
#3
|
||||
|
||||
__________________
"Rock is Dead, Long Live Paper and Scissors" International Paper Model Convention Blog http://paperdakar.blogspot.com/ "The weak point of the modern car is the squidgy organic bit behind the wheel." Jeremy Clarkson, Top Gear's Race to Oslo |
#4
|
||||
|
||||
Miles,
I did a series of “Jerry Cans” based on the free GPM Jerry cans (with permission from GPM). You can find them on the Z site or I can email you a copy just drop me note via private message. I corrected an error in the GPM version the spout should be off set too one side. They are in two colors with markings for both Heer and SS versions and there is a couple of water cans. They should scale down to 1/32 but they will be difficult to build in that scale. For 1/32 scale I would print them on 24 lb paper. Jim Nunn
__________________
There is a very fine line between paper modeling and mental illness. |
#5
|
||||
|
||||
Thaipaperwork has a 1/35 SdKfz 234 Puma which has jerry cans on the fenders.
See: 1/35 SdKfz 234 “Puma” | Thaipaperwork If you have any other 1/35 scale German vehicles, there is a good chance that jerry cans were included with the model. |
Google Adsense |
#6
|
||||
|
||||
Wehrmachtskanister
Dear List Folks:
Ain't the web wonderful and also makes one pull hair from head! I down loaded the gas can from the site printed it then wondered what is the scale? Went to dogpile the search engine of family. Note found the German word and lots of Good pictures in color and the amount of gas it holds 20L however I need a hight or width or thickness to be able to Scale the can I down loaded? Help Thanks, Miles Linnabery, Youngstown, NY |
#7
|
|||
|
|||
The gas cans on GPM's site should be 1:25.
Print them at 1/2 the scale or 50% reduction. |
#8
|
||||
|
||||
a lot of times we have discussions about scale...
what scale is it? what scale should it be? I just wanted to suggest something that I generally do and it includes ignoring the possibly misleading scale that came applied to a model. The internet is a wealth of information and you can easily find specs and sizes for just about anything in the world including wheelbases of vehicles, wingspans and the relative size of a "jerry can" I will do a simple calculation before I start. For example...a real jerry can is 18.5" tall (20ltrs) and I want it at 1/24 scale...then I will produce it at about 3/4" tall and if I want one that is 1" tall...then it would be end up at about 1/18 scale Usually I will ignore the stated scale of the model and measure something on the vehicle I know... for example the wheel rim on a WW2 era Military jeep is 16" (I know, I know, there are also 20" wheels!) so, my 20 ltr jerry can will be fractionally larger than the wheel rim diameter to be in proper scale (regardless of the scale of the vehicle) just some food for thought oh and some found info too: Standard 20ltr "Jerry Can" that, according to sources, still has the same shape and construction as the original German invented WW2 Steel Fuel Cans
__________________
SUPPORT ME PLEASE: PaperModelShop Or, my models at ecardmodels: Dave'sCardCreations |
#9
|
||||
|
||||
Do they have to be paper? I have a set in 1/32 scale plastic that I will never use.
And, I defy anyone to spot the difference between 1/32 and 1/35 with their eye.
__________________
Maj Charles Davenport, USAF (Ret) |
#10
|
||||
|
||||
oh sorry...missed the request for 1/35 scale...
paper Jerry Cans would be 13.5mm tall (1/2" or so?) ...I'd go for the plastic ones! lol
__________________
SUPPORT ME PLEASE: PaperModelShop Or, my models at ecardmodels: Dave'sCardCreations |
Google Adsense |
|
|