Go Back > >

Thread Tools Display Modes
Old 07-31-2020, 06:27 AM
airdave's Avatar
airdave airdave is offline
Join Date: Apr 2009
Location: Ontario Canada
Posts: 13,242
Total Downloaded: 123.73 MB
Clear sheet may be cheap, but I have yet to find the right clear sheet that works best for me, or a source to get it.
I think this may be my biggest problem! lol

I tried a similar method using a heat gun to heat plastic which I pulled down over the canopy plug.
I had difficulty holding the plastic and pulling it down evenly.

If I make any more of these (and can't get my vacuformer working) I'll try your suggestion!

MY DESIGNS & FREE STUFF: Dave's Card Creations

Last edited by airdave; 07-31-2020 at 06:43 AM.
Reply With Quote
Old 07-31-2020, 11:18 AM
smp smp is offline
Join Date: Jun 2020
Location: Homosassa, Florida
Posts: 30
Total Downloaded: 96.10 MB
I have never gotten it to work by pulling hot plastic over a plug, It is pushing the plug down through the hot plastic that works. When crash molding parts out of white plasticard, like cowls or spinners, 20 thou card works and is very thin when finished. So you need a source of fairly thick clear sheet. Check Evergreen

I always support the heated plastic/cut out plates sandwich over a bowl or coffee cup so I can jam the plug down firmly. You have to be quick and not hesitate. Heat it, hair dryer is an excellent idea, slap it on the support and stick the plug down firmly in one smooth motion. You will mess up some, but you will get a usable piece as well. OH yeah, Slightly bevel the edges of the cut out in bottom plate, it helps the hot plastic stretch as you push the plug down

Last edited by smp; 07-31-2020 at 11:23 AM. Reason: added comment I forgot
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -6. The time now is 09:38 PM.

Powered by vBulletin®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Resources saved on this page: MySQL 13.33%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
Copyright © 2007-2020, Paper