[Arne2019]

Originally Posted by Millenniumfalsehood

Noticed an error in the model that had me scratching my head for a bit. The hull parts for MB2 both have "TOP" marked on them, and they're not identical. It took me some time, but I found out that the panel with MCRN printed on it is indeed the actual top panel, but this probably should be corrected. Also, I noticed when assembling MB1 that the structure is slightly undersized in width, as the hull panels overlap by 2mm or so, but I had to cut the front of the structure down by a similar amount. The latter is probably due to not using an appropriate thickness of material and was expected when I assembled it, but I can't determine a cause for the former.



I'll post more here as I continue assembly. All in all, it's an awesome kit and none of the problems so far have been anything approaching unfixable.

When i'm finished building. I'm going to try and paint the 2mm white on MB1. if that don't work/turns out ugly I rebuild.
I didn't think of cutting it down.