|
Dave - Sergey's method would not work for the larger scales.
You don't incidentally use a generic track - as I said in my explanation (perhaps I was not clear)...
"Simply copy two sets of tracks and then, before you cut the tracks out, draw up the templates on them (or work out where your cuts should be to create the templates), and then cut the tracks out to the template shapes."
To clarify further, you need two copies of kit tracks because you are going to overlay the one over the other to give the depth - AFTER you have worked out the way to cut them according to the template examples provided by Sergey.
Obviously, the templates will vary depending on the types of tracks.
I have made one set where I actually used 3 "templates" for the layering.
----------------------------------
But having said that you could use the same method to provide 3d layers to larger-scale tracks, proving the upper templates are only there to position the individual pads etc. but are not joined to each other.
__________________
The SD40 is 55 now!
|