Hi Vermin King
It would be spectacular , so I will hope too
Let's go, the first cut is the deepest
First, the base plate is reinforced with two pieces of 0.5 mm cardboard. The two layers of cardboard should prevent the base from warping, now let it dry thoroughly...
... For part A1, the windows, doors and small bricks are cut out first ...
... glue onto cardboard , windows and doors to 0.3 mm and the bricks to 1 mm , because they should protrude ... Now glue the prepared templates to the back . 1 mm gray cardboard in the area of the windows and 1.5 mm Finn cardboard for the doors on the ground floor.
Sincerely
Kurt