Excerpt from instruction (the part titled "Poszycie Kadluba"):
Quote:
Covering the hull
Start from gluing on the leafs to keel and part G-G1, between formers W6 and W7, keeping in mind that the leaf cannot extrude behind the formers. Check with a ruler, whether the leaf between two formers is glued on properly. Round the not glued fragment of leaf. Cut out rectangles marked on the plating. All segments of plating form into a ring before gluing on, for example on the edge of table. Then succesively fit 2-3 segments of plating and glue them. It's best to start from the top, placing simultaneously and symmetrically on both sides of hull down to the keel. Segments for which there are leafs connect this way: glue the leaf to one of the sides and lay it on the framing. The side with leaf attach earlier so that the opposite end lies down on the leaf. All segments are glued from the top to the keel. Parts 8 and 9 lay from the top - they will also play the role of torpedo launchers.
|