#31
|
||||
|
||||
Hi
oh , it is a nice sailing ship , is this a paper Modell ? and on it goes ... Parts 43/44, the small archway ... glue the frame ... ... install reinforcement ... and fold together Now attach the small tower fix ... and wall part 41 first glue to the kink and let dry ... and finally glue the rest together Yours sincerely Kurt |
#32
|
||||
|
||||
continue with the castle construction
The small passage to the keep is placed ... then the courtyard T3 With wall part 42, the castle is closed ... for the time being but again reinforce everything ... and now close the wall ring Yours sincerely Kurt |
#33
|
|||
|
|||
Quote:
No Styrian, it is a wood model. I did it, long time ago Greetings |
#34
|
||||
|
||||
Hello Llaut Mallorquin ,
thatīs really a very nice sailing ship , thankīs for the Pictures now it goees on with my Castle ... The rock part T20 fold well with the steps, where I will replace the drawn steps with "real" ... which are made of 1mm cardboard .. Layer the layers in layers ... disassemble the rock and glue it to the steps ... ... and then grow the second part. Yours sincerely Kurt |
#35
|
||||
|
||||
Now rock part T22 ... glue step by step
Then T23, with the designation T24 on the wall is wrong, adapt to the main tower. Yours sincerely Kurt |
Google Adsense |
#36
|
||||
|
||||
..
The parts T 7/8 and 9, here I will change a lot ... The half-round part is reinforced with 3 mm Finn cardboard ... glue the strip butt, allow it to dry well ... The palisades are cut up and glued onto 0.9 mm Finn cardboard Meanwhile, part T10 prepare Yours sincerely Kurt |
#37
|
||||
|
||||
continue on the construction site
The reconstruction of the palisades creates a gap here that will be closed ... since I'm redesigning the site anyway, it does not matter. With part T12 the castle digging is produced ... and continued with part T13 The two tabs (T14) I cut off ... with part 11, the castle dig now closed, and complained to dry Except for the stockade, drawbridge and gate now all parts are installed, now comes the terrain Yours sincerely Kurt |
#38
|
||||
|
||||
That's a very neat job Kurt. Good to reinforce the walls as the model looks pretty big!
Regards, Erik |
#39
|
||||
|
||||
Thank you Erik
The whole castle was glued on 3 mm Finn cardboard. The rocks are structured using a mixture of glue water and toilet paper. On the meadows I also glue toilet paper. After drying for 24 hours, the white color has changed to gray. Since the courtyard is too smooth for me, this is also glued with paper. The area is now primed with watercolors. Yours sincerely Kurt |
#40
|
||||
|
||||
Drawbridge and Palisade Gate are placed ... now the palisades are cut off one by one, sharpened and glued piece by piece. After four hours the picket fence along the moat is finished In order to structure the smooth roof a little bit I glue a layer of toilet paper on ... and dye it slightly with watercolors. After all the palisades are "buried" I start with the greenery ... in the courtyard already grows the grass Yours sincerely Kurt |
Google Adsense |
|
|