#11
|
||||
|
||||
Hello, Kurt. Your roofs look great. Are you weathering the rest of the builing in the same way?
__________________
Give me a pigfoot and a bottle of beer. On Flickr: https://www.flickr.com/photos/153077...57692694097642 |
#12
|
||||
|
||||
Hello
@ Kevin : yes there are so much other models to build @ Rupert : it is much more work with the Windows , but I like it so much @ Philip : yes I weathering the hole model now let´s go on … The small windows of Part 10 are now stuck back with the thinner Finn cardboard (0.9 mm) behind ... that is enough for this The side roofs should be made of stone, I dye this with pastels and eraser Yours sincerely Kurt |
#13
|
||||
|
||||
now the Pictures , I was to quickly with my fingers
|
#14
|
||||
|
||||
What a beautiful model ... and build!
I agree, the detailed windows add so much more to this already great model. Chris
__________________
website: http://www.papierschnitzel.com - patreon: https://www.patreon.com/papierschnitzel - facebook: https://www.facebook.com/papierschnitzel |
#15
|
||||
|
||||
Thank you Chris
Now continue on the cathedral construction site ... The tab must be cut out ... because the windows extend into the area of the tab The angular part (part 11) is cultivated Yours sincerely Kurt |
Google Adsense |
#16
|
||||
|
||||
Even with Part 13 I have to make space between the windows for the tabs of the roof ... Since the windows below, just to the tab, I pull the
Finn cardboard 5 mm further down Connecting the roof with the upper gallery ... and gluing on the horizontal northern façade Thus, now is first part of the longship Yours sincerely Kurt |
#17
|
||||
|
||||
Looking good, Kurt!
Always appreciate your detailed build threads. Fred |
#18
|
||||
|
||||
Hello ,
thank you Fred after a break it goes on again ... Part 21 is glued on part 20 ... Cut out the window - glue the frame directly to part 20 ... ... behind a piece of reinforcement must be glued ... where then the battlements are cut out Yours sincerely Kurt |
#19
|
||||
|
||||
Lovely model and nice work....
__________________
The SD40 is 55 now! |
#20
|
||||
|
||||
Thank you Kevin
With a small change, the roof fits on it ... now glue the angle 18 The nave is now glued ... and is closed with partition 16 and reinforcement The first fitting with the crossing tower Yours sincerely Kurt |
Google Adsense |
|
|